2. speakers
  3. 1140998264

Upgrading to Totem Mani 2's

I’m considering upgrading from the Model 1’s to Mani 2’s. I’ve read most of the forums here on A’gon regarding the Mani’s and the one thing that they all pretty much have in common is that you need a lot of power (and current) to drive them. I’m currently running a Plinius 9100 for my Model 1’s which is rated at 120 W per side (around 200 W @ 4ohms). I’m also running the Plinius on 220v which has opened it up considerably and gives the bass a lot more punch (something I know I'll need for the Mani's). My room size is approx. 15 x 22 and my listening position is about 16 feet from the speakers. I normally listen at a moderate volume (10 o’clock is loud for me and 12 o’clock pretty much drives me out of the room). I know the old adage that you can always get a bigger amp, but if I’m going to spend several thousand on a speaker upgrade I’d rather not turn around and spend several thousand more on upgrading the amplifier as well (at least not right away). In addition I'm very pleased with the 9100 and like the Plinius sound very much. So what do you think Mani 2 owners? Am I living in a bubble thinking that the 9100 has the juice or based on my room size and listening habits will the 9100 do the job for me?
jaffeassc
telemarc
13 posts
 
I run my mani's with a Totem Amber which is a 230 watt into 4 ohm integrated made by sim audio for totem. Very pleasing to the ear and plenty of power for the room which is 14 by 22. If I play hard rock and crank it up to be almost unbearably loud then it is not enough amp but I mostly listen to Blues and world music with a bit of classical so it is fine. I considered upgrading to a W-5, P-5 seperate setup but the more I listen to my setup the more satisfyied I have become.Here is my system.

http://forum.audiogon.com/cgi-bin/fr.pl?vopin&1133742864&read&3&4&
jaffeassc OP
166 posts
 
Thanks very much for your input Telemarc. I’ve read about the Amber but I’ve never had the opportunity to audition one. I’m sure it sounds wonderful with your Mani’s. Coincidently, I also have a sliding door along one wall and my other wall is open to a hall/stairway so it appears that our listening areas may be very similar. Based on what your said I’m also starting to feel a little more confident that the Plinius can do the job. I’m not sure that it measures up to the Amber but they are similar in terms of power. BTW I’m very intrigued by your stands. I guess you don’t have to worry about filling those babies with sand!
bdgregory
1,715 posts
 
ok, this is a cheap tactic to keep this thread in the current list . . . .
I'm a little surprised the isn't more participation. I assume there are many Mani-2 owner's (or former owners) out there. Can more of you weigh in? I would like to hear more too.
baroque_lover
102 posts
 
I sold Totem for a couple years. The Mani-2 truly needs a bare minimum of 250-300 watts per channel. To extract maximum performence I reccomend 400-500 watts. The only integrated amplifier that I have experience with that drove the Mani's "OK" was the Krell KAV-400Xxi but even then it was not adequate IMO. The Mani's are a demanding speaker with amplification, placement, and cavles but the reward is worth it. I beleive with the power you have the Model-1 is a better fit.

Sorry about the grammer, on public computer and had to type fast.
telemarc
13 posts
 
The stands are made by a local guy in town and are solid black marble. To accomodate the open side and the sliding glass door I toed the Glass door side in a little more than the open side which removed some of the reflective properties and centered the soundstage more.
More to discover