I need a good arm to mate with a modified Lenco L75

I have a Artisan Fidelity modded Lenco and that table deserves that best arm I can buy.  I have a SME arm by no means the best but still a great arm.  I wouldn't hesitate putting a Reed, Schroeder or any top rated arm on a Lenco.  However it is more important matching the arm and cartridge and just having a fancy arm that doesn't match well with a particular cartridge.

In the hardcore Lenco cult (I mean that in the good sense ;-), the TransFi Terminator is developing the reputation as a great arm for the table. Unlike the Eminent Technology---also a linear-tracker of course, the TransFi is positioned on the rear of the table, running left-to-right, not front-to-back on the right side of the table.

bdp24, The position of the LT tonearm might only matter if you are using a Lenco still with its original plinth where the chassis is supported on flexible supports.  Most guys who upgrade are using massive unsprung plinths; the tonearm could be mounted anywhere without much effect.

True Lew, but I wasn't thinking in terms of the moving mass of the arm wand (one reason the VPI tables, especially the TNT's, were a great platform for the ET arm). I mentioned it 'cause I never liked having to bend over the table and look sideways to see the stylus for cueing, etc. It's nice having the arm, cartridge, and LP groove facing you! But that comes at a price---the Terminator sits over the platter, requiring care in getting LP's on and off. Being a longtime Townshend Rock owner, I'm use to that!

How about the best vintage best midvintage and best modern. 3 arms total. Ortofon/Sme Sumiko/Micro and Graham or Talea?