2. analog
  3. 135669-74046

Any Love for the Grace F10 L Moving Coil Cartridge

Just picked up one of these super rare cartridges and wondered if any of our members had ever owned one and if so could offer any feedback on what to expect.

I had convinced myself that I would not buy any more cartridges and had actually being selling some off to pay for a rebuild on one of my most valued cartridges. Unfortunately for me I have a weakness for those very rare vintage cartridges and I simply can't stop myself if one becomes available at the right price.

The model I have coming is the "L" version with hollow Boron cantilever (hollow boron is another weakness of mine). The specs are as follows.

  • Frequency characteristics: 20~30,000Hz±2dB
  • Output voltage: 0.75mV(5cm/sec, 1,000Hz, 45°)
  • Impedance: 23Ω±10%(1,000Hz)
  • Channel balance: within 0.5dB(1,000Hz)
  • Crosstalk: below -25dB(1,000Hz)
  • Stylus tip: 0.2×0.8mil Advanced Luminal Trace
  • Stylus pressure: 1.8gr (±0.5gr)
  • Compliance: 20×10-6cm/dyne
  • Cantilever: Boron composite
Like my other posts, I will report back with my own findings for those who stumble across this thread in the future.

Thanks.
ateal
dgarretson
2,592 posts
 

I have the low compliance "P" version.  I haven't listened to it in awhile.  Will do so soon. 


F-10C specifications:
Frequency characteristics: 20~30,000Hz±2dB
Output voltage: 0.5mV(5cm/sec, 1,000Hz, 45°)
Impedance: 15Ω±10%(1,000Hz)
Channel balance: within 0.5dB(1,000Hz)
Crosstalk: below -25dB(1,000Hz)
Stylus tip: 0.2×0.8mil Advanced Luminal Trace
Stylus pressure: 1.8gr (±0.3gr)
Compliance: 20×10-6cm/dyne
Cantilever: Superhard aluminum alloy-made tapered pipeline
Weight: 8.6gr
Price: ￥26,000

F-10L specifications:
Frequency characteristics: 20~30,000Hz±2dB
40~20,000Hz±1dB
Output voltage: 0.75mV(5cm/sec, 1,000Hz, 45°)
Impedance: 23Ω±10%(1,000Hz)
Channel balance: within 0.5dB(1,000Hz)
Crosstalk: below -25dB(1,000Hz)
Stylus tip: 0.2×0.8mil Advanced Luminal Trace
Stylus pressure: 1.8gr (±0.5gr)
Compliance: 20×10-6cm/dyne
Cantilever: Boron composite
Weight: 8.6gr
￥44,000

F-10P specifications:
Frequency characteristics: 20~25,000Hz±2dB
40~20,000Hz±1dB
Output voltage: 0.75mV(5cm/sec, 1,000Hz, 45°)
Impedance: 23Ω±10%(1,000Hz)
Channel balance: within 0.5dB(1,000Hz)
Crosstalk: below -25dB(1,000Hz)
Stylus tip: 0.2×0.8mil Advanced Luminal Trace
Stylus pressure: 2.5gr (±0.5gr)
Compliance: 13×10-6cm/dyne
Cantilever: Tapered OX titanium
Weight: 9.3gr
Price: ￥46,000

ateal OP
97 posts
 
Thanks dgarretson, I presume the compliance is measured at 10Hz and not 100Hz like Audio Technica and Denon.
chakster's avatar
chakster
6,144 posts
 
@ateal 

they are all measured at 100Hz, Japanese style. 
Grace are high compliance cartridges for lightweight tonearms.

ateal OP
97 posts
 
Thanks Chakster, that makes this one super high compliance with a converted figure of 36. That’s quite a bit higher than the Grace MM’s such as the F9 Ruby and Grace Level II. 

What I find odd though, is that the mid point VTF is quite heavy at 1.8g. Normally super high compliance carts have average VTF’s of 1 to 1.25g. 
More to discover