Thiel Owners

Hi jafant, it's been quite a while sorry for not responding lately.
I was pretty busy with high end headphone rigs in the past months and therefore diden't use my CS 3.7s.
Since i don't yet have the budget to complete my Thiel system i got into high end headphones last year and i'm really liking it.
I need advice on choosing a very good int amp for my Thiels.
If some of the 3.7 owners use an int amp to drive them please let me know what is your best choice.

thieliste,

I doubt many 3.7 owners have driven the 3.7s with a succession of different amps.  But FWIW, I've found the 3.7s pretty easy to drive.
My 140W/side Conrad Johnson tube amps drive them great (great tone, grip, control) and even a 14W integrated tube amp sounded wonderful (if less taught in the bass) on the 3.7s.

Like most speakers you'll probably realise the greatest dynamics the more good watts you throw at them.  But that's the usual trade off between tubes and SS amps on most speakers of average efficiency/impedance.

Hi guys. I'm not up to speed with which amps do and don't, but I do have lots of general Thiel experience. I have noted that current delivery capability is very important, especially in large rooms or loud volumes. If an amp doesn't double its 8 ohm current into 4 ohms, it will probably sound anemic, and its oomph into 2 ohms is relevant also. Ayre amps are good fits. Jim used big Krells. Of related importance is that cabling is more critical on Thiels than usual. One reason is that phase coherence is easily scrambled by cables. On most speakers that doesn't matter because they are already scrambling phase, but the degradation is significant on Thiels. Also, Thiels very low impedance load requires more current through the cable, exacerbating its anomalies. I highly recommend very short runs of speaker cable. Jim used Goertz flat cable in 3.7 development.

The Modwright KWI 200 SE might me a good choice for the CS 3.7 ?