New Tweak --- Its Fantastic


THE NEW TWEAK

Over the good part of this past year I’ve been beta testing a new tweak, the name of which is "Total Contact." Its a hi-bred graphene contact enhancer that is different from all other contact enhancers that have come and gone for one reason or another. I’m not new to these contact enhancers, having had quite a bit of experience with a product developed by the late Brian Kyle and his "Quick Silver" contact enhancer. The "Total Contact" is different ... a LOT different.

"Total Contact" is graphene based and is not a vibration control. It eliminates micro-arching between two contacts. Micro-arching, much like Micro-vibration smears the sound in our stereo systems. Its the type of distortion that we don’t know is there .... until we eliminate it. There is no break-in as we know it. The sound is improved right off the bat, but what you hear is only a smidgen of what’s to come.

I tested three generations of "TC," each of which was an improvement over the previous incarnation. The final mix was cryogenitically treated and made for a more effective, much smoother application. It comes in a large hypodermic needle type plunger containing 1.5 ml of product and includes a instructional DVD and an application brush.

The application should be applied with a very thin coat to all of your electrical connections .... from your cartridge pins to your power cords. I did my entire system, including the ends of my fuses.

Upon initial application, you will notice an improvement in clarity, correctness of tonal balance and a more overall organic sound. But ... that is just scratching the surface of what this magic paste does. As it cures, the improvements become more apparent. Much more!

There are two real break-through events that happen almost to the day with "Total Contact," one at four weeks and another at eight weeks . At four weeks, you’ll get a real jump in clarity and overall improvement. That’s only a taste though of what’s to come at eight weeks. At eight weeks your system’s focus will make a jump in SQ that is so real - its surreal.

After 40 years in the hobby, and a total tweak nut, I have never heard anything that does what this graphene paste does. The see-through clarity at eight weeks becomes simply amazing. The "paste" eventually cures into a kind of polymer plastic and it seems that the sound improves with each listening session. So, its important that you leave your contacts alone for the duration. If you’re the type of person that continually switches wires in and out, you’ll have to re paste until enough time has elapsed to get "the cure."

The only problem I had was with the first batch and that had to do with shorting out a tube pin in the line stage. Use the "TC" very sparingly on tube pins, if at all. I only had problems with the line stage tube pins. The Amp, CD Player and Phono Stage has had no tube pin problems at all.

Tim Mrock, one of our fellow A’goners, is the developer of the product. Its taken Tim 15 years and several patents to get it right. Tim has "pasted" every electrical contact he can find in his audio system, all of the switches in his circuit breaker box, every contact in his car ... and has used it in commercial applications such as hospital circuit breakers, surgical lights ... and other places where efficiency and long life of electrical components are deemed important.

This product is highly recommended to anyone who truly wants to get the most out of his/her audio systems. There’s enough product in each tube to do at least two audio systems as it just takes a very thin coat on each application to be effective. The last tube was enough to do my system twice and then a friend’s system this past weekend.


Frank

PS: There were a couple of other A’goner beta testers of this product as well. Hopefully, they will chime in here with their experiences for comparison. I "pasted" both of Steve Fleschler’s systems a few days ago, perhaps he will comment on his results too. We forgot to paste Steve’s power cords though, so there’s a lot more to be had from Steve’s two fantastic systems.

Frank
128x128oregonpapa
^^^ jafreeman ...

Percussion is amazing on my system also. On good recordings, the realism is uncanny at times.  

Have you noticed that your system seems "seamless" like your crossovers don't exist now that you've applied the TC?  

By the way ... you haven't heard anything yet. There's that four week ...and especially the eight week breakthroughs yet to come. :-)

Frank
Frank---Yes, the whole is now greater than the sum of the parts.  The better connections are creating a more seamless energy pathway throughout all components.  According to claim, the TC solves the problem of oxidation and continues to improve the connection over eight weeks as it hardens.  This is very appealing to anyone who is putting together power cords with clamped connections from the excellent DIY materials now offered and should also appeal to anyone who has put together a component system at all---highly recommended.  
Frank, thanks for starting your threads on all of the sound improvements I and others have been making through being informed of these products right here.  
Regarding DIY, in addition to treating the inside of Furutech PC plugs, I recently treated the compression fittings of ICs made with Bocchino B11L RCA connectors and EIZZ XLR connectors. I also treated the wiring harnesses inside a SOtM USB-to-Ethernet converter, a SOtM USB regenerator, and the DIN plug between the PCB and Rubidium core in an SRS Perfection 10mHz master clock. It’s all good. Next stop is the ATX power harness inside a QNAP RAID server that hosts Roon. 
jafreeman & dgarretson ...

Have you guys pasted your receptacles yet? Also the connecting wires and screws at the plug (turn electricity off for this one). Also, try pasting the inside of your wall plate before you reinstall it. 

I have a dual wall switch. One controls the porch light and the other controls the audio system. I pasted the receptacles and the inside of the face plate resulting in a  noticeable improvement ... a further lowering of the noise floor. 

Frank

@oregonpapa 

I haven't tried it in the wall receptacle yet, but am working in that direction.  Next step will be the receptacles and inside taps and wiring of a power distribution strip and balanced AC transformer.