Furutech GTX NCF receptical break in, how long

@ paulcreed, I also have and use the furutech receptacle cover plate🎼🎶🎵.

Today makes 3 weeks, I put them back on 24/7 couple days ago and I still think they need more time. Highs are nice but the bass and fullness is lacking, I may be around 450 hours. Has anybody had problems with bass this far in breakin process? Did anyone find even with 1000 or more hrs or fully broken in bass was not as full or big as before adding NCF? Maybe tighter bass but not as big or full. This is a bad ride trying to break in these little outlets. 

Paul, I say it’s long enough, but as you know other posters have indicated otherwise. At this point, I would test with another power cable(s) from the outlet to see if it may be a synergy issue. Have you checked the wire to the outlet to verify there are no loose connections?

I dunno guys I have at least 14 of the NCF outlets and some NCF inlets and I don’t recall having any problems with them from the start. I guess they did get better with time, I don’t remember.
I use all Cerious Matrix cables so perhaps they lessened the break in variations that others have noted.

Paul, are you sure you did not reverse wire the load and neutral?

ozzy

I don't believe they are reversed. I have black to brass screws. I may check for piece of mind. It's not there is no bass just not as before outlet install. I would think 450 hours would be sufficient time, but what do I know never used rhodium before. I'll flip some power cord around to see if there is a change. Only though is years ago I reconfigured system and cables were pulled and system was not used for 3 or 4 days. It took a couple days of running system to come back way it sounded before.  Maybe I'm not using enough current for breakin due to no solid state amps to run 24/7 playing music. I'm not ready to give up yet because highs are better than I've ever heard in this system.