Cartridge Loading- Low output M/C


I have a Plinius Koru- Here are ADJUSTABLE LOADS-
47k ohms, 22k ohms, 1k ohms, 470 ohms, 220 ohms, 100 ohms, 47 ohms, 22 ohms

I'm about to buy an Ortofon Cadenza Bronze that recommends loading at 50-200 ohms

Will 47 ohms work? Or should I start out at 100 ohms?

I'm obviously not well versed in this...and would love all the help I can get.

Also is there any advantage to buying a phono cartridge that loads exactly where the manufacturer recommends?

Any and all help would be greatly appreciated.

Thanks in advance.
krelldog
Thank you, Wyn. Food for thought - or rather, food for experiment. Another pole means another stage and another pair of complementary devices, so the trade-off is obvious. But next is the amplifiers' turn, so it will have to wait!

Thanks again for your insights.
Dear @krelldog : I posted several times in this thread each one ignorance levels where some people has higher when other lower in this specific subject but additional to that there are all over the world ignorants that additional are in the stupidity are because can't understand that or those or anything on audio.

My attitude is always try to help for any one ( including me. ) trys to low those ignorance levels but I always ignore stupid persons because will never learn.

R.
Dear @almarg : "   I’m truly impressed! ".. With all my respecto to you and other enginners the " best " ones are/were the ones designers inside Analog Devices, B&B/TX, in the past National and so on and Wyn belongs to them.

They made and make only true industry reference designs/items, they write the " standards " about through their work, their first hand experiences  put all them in a league " orders of magnitud " above we  mere mortals. Especially me.

@wynpalmer4  I really hope you can stay with us at Agon. Welcome a board.

R.
@krelldog it's endless thread, good if you learned something, but it's obvious that you can only TRY differend loading to find what YOU like the most, not other people. As been said there is no harm for your cartridge to try whatever loading. If you prefer to read instead of listening then it's very specific way to learn. Practice is more important. This is why it's nonsence to ask what other people like when it comes to loading, simply becase you system does not sound like other people systems. For example you can prefer loading "X" with one amp/speakers and loading "Y" with another amp/speakers.  
Your right...and the reading led to practicing. I was clueless before I posted the thread.
I bought my Plinius Koru when I bought my current cart-Ortofon Quintet Black. Ortofon recommended me loading the cartridge at 20 ohms. I had a 22 ohm load setting and thats where I set it.
My soon arriving Ortofon Cadenza Bronze recommended loading at 50-200 ohms...I was just looking for a little direction....thus the thread.
I'm glad I posted it....I got some great feedback.