2. amps-preamps
  3. 136230-113932

No sound from Mack !!!

Hi
I have Mcintosh C-26.....Mcintosh 7100, Platinum audio monitors.  MY problem is when i connect the speaker wires to the (C26) main/remote on the back i get nothing......i then connect to the (back) of the 7100 and i get sound .....any idea as to what the problem might be?
                                               Most Thanks in advance
                                                        Jeff......
128x128mantaman
mantaman's avatar
mantaman OP
37 posts
 
And the (back of the( 7100) only has provision for one set of spkrs /??
Post removed 
imhififan's avatar
imhififan
2,184 posts
 
According to the C26 Manual http://wegavision.pytalhost.com/McIntosh/C26_own.pdf
SPEAKER SWITCHES
To switch the main and remote stereo speakers using the push buttons on the front panel, the power amplifier output leads must be connected to the amplifier output terminals on the rear of the C 26. The main speakers must be connected to the main speaker terminals and the remote speakers to the remote speaker terminals. If either main or remote speaker button is pushed to OFF, load resistors are automatically connected to the power amplifier to compensate for the speaker.

mantaman's avatar
mantaman OP
37 posts
 
Set up as suggested by Imfififan......No sound ???
noromance's avatar
noromance
9,771 posts
 
Blown fuse from all the testing?

More to discover