ARC Ref 6 plexiglass cover

I misspoke in a prior post. The Ref 40 undercover is always metal and stands proud of the frame, there is no option of a perspex undercover. 

You can can get a lot of the benefit of the Marigo footers by dropping a puck of his material under your existing footers and the cost is a couple of hundred. You can reach Ron at marigoaudio@frontier.com

@folkfreak ......... Can you put the footers under the ARC feet? Since there is not enough room between the plexiglass and chassis ? And since the chassis is raised more than the undercover , and then there is the plexiglass bottom cover. Wow i just looked and there really aint no room at all for footers. 

@folkfreak .. This is the bottom of my Ref 6 btw. 

Adding any other  footers under the existing ARC ones would not be a good idea as the sorbothane in the existing feet will fight the new footer. The one option that would work would be small sub based/platforms under each existing foot. Ron sells a set of these, cost is about $200. I guess you could also try an inverted footer that rises to a point like the Synergistic ones (which I have never liked)

As I said I get it to work with two points of contact on the chassis and one on the undercover (the design of the Marigo mystery feet is such that they end in points which is wher contact is made).

I have also tried bits of material above the footer to bring the chassis and sub cover level but this sounded terrible

By the way is the undercover on the Ref 6 truly plexi? If so all my rules about contacting it are out the window as plexi is so much less rigid than the older metal under covers I have, I’m not sure I’d like any footer contacting plexi