Amplifier ideas with KEF Reference 1


I'm thinking about pulling the trigger on a pair of KEF reference 1's for my 10'x14' office (currently LS50's). Current electronic setup is all PS Audio (bhk monoblocks, bhk  signature preamp, directstream dac). Incredible sound, zero complaints other than the fact that the monoblocks run hot. I'm getting cooked so the whole ps audio setup is listed for sale.... Although it just may end up at home for a future 2 channel setup!

So with that background, please share ideas for a high quality system that's cool running. Budget up to $15k. I'll add that I favor the warmer side of the spectrum. I'm a bass player and like tight, fast, deep bass..... Glorious mids, and smooth highs. Current ideas to match with the  KEF Reference 1's include:

1. Bel Canto Black EX (integrated or the separates). My contact says the separates are far superior. I'm concerned this setup is too analytical. Anyone heard them?

2. Bel Canto Ref600m. Keep my directstream dac and bhk signature preamp. Probably more than good for an office!?!

3. Hegel 360 or the new forthcoming monster integrated (590)? They're not too pretty to look at but it seems like I've read about hegel and kef being matched at several audio shows. Is there a hegel house sound particularly with the KEF’s?

4. McIntosh mc611. I'll admit it.... I'm a sucker for the looks of McIntosh plus their easy listenability. I've never had ear fatigue listening to a McIntosh setup. I'd be keeping the directstream dac and bhk signature preamp for this combo. Afraid that is be giving up a lot going from the bhk monoblocks to the McIntosh with similar heat. 

5. Luxman L509x. Brand new. Supposed to be very musical and runs cool. I'd probably run with the directstream dac. 

Your thoughts / ideas are appreciated.... Especially if you've heard the recommendation with KEF reference 1's. It's all about system synergy, right!?!

thank you,
ken


keoliphant
keoliphant OP

These Kefs are not an easy load in the bass, hence some saying they are bright sounding, because amps can’t drive the bass hard enough.

Like I said before, and I have no skin in this like some others, before you buy the wrong amp to do the job or even spend too much.
Ask here or get someone if you don’t know what your looking at, to analyse these two graphs for impedance and phase of these Kefs you have, especially in the bass 50hz-200hz to give you an idea of what amp to buy.
https://www.fidelity-magazin.de/wp-content/uploads/2016/08/1-KEF-Reference-1-Impedanz.jpg

https://www.fidelity-magazin.de/wp-content/uploads/2016/08/2-KEF-Reference-1-elektrische-Phase-1024x...

Cheers George
Georgehifi,

It isn't just a matter of current, it is a matter of voicing. Most modern amplifiers will have 0 problem pushing power into most impedances.

You take a very scientific approach our approach is via actual listening and considering we sell almost every KEF including the Blade, Ref One, Ref Three, Ref Five, Q, R, Series T, Series, Wireless, we know how and what works with a Kef.

If you look at two capable amplifiers into a load unless that speaker is pushing the stuffings out of the amplifier, most amplifers will sound great the difference is how the particular pairing will sound when used together. 

We did a similar demo today on the Elac Adante monitors, first using a 60watt Nad and then a 40 Watt Naim Atom. of course the $3.5k Naim Atom killed the $1,400.00 NAD and both amplfiers produced more than enough volume the difference was  the clarity of the Naim and the Naim's much tighter fuller bass and supeior macro dynamics, there was 0 strain with either amplifier.

Dave and Troy
Audio Doctor NJ
You take a very scientific approach our approach is via actual listening

Sorry, but I take both. As they are equally important.
And anyone recommending any amp should do also.


Hoping to learn more.
You may get an amp that behaves like a tone control into the Kef's difficult load instead of doing what amps should do, "maintaining a flat frequency response regardless of load variations".
Like this one, the wavy top line is what it’s frequency response is like into an easy "simulated Kantor" speaker load, far from flat!, it will be even worse with the Kef’s as they are harder to drive than the Kantors, this is what behaving like a tone control is meant.
https://www.stereophile.com/images/archivesart/V10FIG02.jpg


Cheers George
@keoliphant OP
Since this is for your somewhat small office (10x14) imo the Naim Unity Nova would be your best choice and it will sound good on the KEF. At $7500 it’s a steal and it is all-in-one box solution and does not run hot like your PS Audio BHK monoblock amps. The sound quality is spectacular very musical smooth and refined. Comes equipped with very good quality streamer/DAC.
Georgehifi,

Your posts speak of someone with theoritical knowledge.  Your example of a sample simulated load with Kantor's circuit is somewhat flawed as they also built in a zobel network into the load and a simlulated load may not take into accout the affects that the speaker cable would add to the load which is going to then affect those measurements as well. 

I also don't think that Stereophile uses simulated measurements any more either. 

I rember reading one of your posts on a loudspeaker that you said wouldn't sound good on anything other than a particular high powered solid state and yet we got fantastic results with a low powered tube amp.

So there is theoritical knowledge vs practical knowelege and experience which is what we do we experiment with different amplifiers on a set of speakers till we create the sound we find desirable. 

As per Caphill he is very correct the Naim Nova is fantastic it is practical, compact, warm and punchy, cool running with a fantastic app and it sounds wondeful on the Ref 1 a perfect office system, we show this very same combination in our shop the Naim's slightly warm rich presentation coupled with its punchy dynamic drive makes for a very musical engaging system. 

Dave and Troy
Audio Doctor NJ