Perfect Path Technologies: Omega E mat

DO NOT put anything inside the panel!!! Attach the Omega to the OUTSIDE of the panel. On the inside of the door of a breaker box is okay, but NEVER open up the panel unless you are a qualified electrician and know exactly what you are doing!

^^^ I did my panels by attaching one mat to the inside of the metal door of the panel, and then the other one is up against the switches themselves. I removed no switches, nor did I fool with any switches. There is nothing touching any wires anywhere in the panel. In essence, its just a stock panel with two Omega E Mats magnetically attached to the inside of the panel door. In addition, there has been no TC treatment inside of the panel anywhere. 

Stereo5 ...

It sounds to me as if you had a wiring short in your panel. Not the case here at all. But, thanks for your concern.

Frank

I would say that the breaker box panel door inside or outside should be a safe location. My guess would be more effective on the inside of door but for those who worry about such things go with the outside.

Agreed that it would not be wise to go deeper into the panel than this.

  ok, thanks everyone.  I will put on the outside of the breaker box