.
Steuspeed....so, if a guy is sitting in row 7, he probably has three or four pairs of speakers on the side walls in front of him that's playing rear channel tracks. Amazing, because I could not localize where the info was coming from....just total imersion. In my home theater my seat is 30 feet from the screen and I am cosidering another pair of speakers about ten feet in front of me along the side walls for more room fill....and I was wondering what channel to assign to those speakers. I have extra sets of speakers and amps to give this a try.
My 5.1 config as of now I have:
1 sub
....all speakers below are full range
1 center
2 fronts L&R floor standing to the side of the screen.
2 front side axis L&R : (along the side wall eight feet in front of the main front speakers, mounted on the wall 5 ft off the floor...Y-connected from front channel.
2 surrounds mounted 10 ft off the floor on side walls 5 ft behind seating.
Proposed:
2 surrounds L&R 10 ft in front of seating, mounted 5 ft off the floor, Y-connected from surround channels.
...to make it a true 7.1 config...
2 surround back L&R 20 feet behind seating, mounted 10 ft above seating area, centered 10 feet apart. I have to re-read my manual to see if the rear surrounds in a 7.1 config are engaged on 5.1 material.
My system sounds really good as-is....I'm just trying to see if I can get better.
The Dark Knight in IMAX started all of this insanity.
To all of you, Steuspeed, Naked and Shadorne...thank you for your input, I really appreciate it....again, Audiogon has been a godsend for me in helping me put together my 2-channel and home theater systems.
...thanks again....mitch
.
Steuspeed....so, if a guy is sitting in row 7, he probably has three or four pairs of speakers on the side walls in front of him that's playing rear channel tracks. Amazing, because I could not localize where the info was coming from....just total imersion. In my home theater my seat is 30 feet from the screen and I am cosidering another pair of speakers about ten feet in front of me along the side walls for more room fill....and I was wondering what channel to assign to those speakers. I have extra sets of speakers and amps to give this a try.
My 5.1 config as of now I have:
1 sub
....all speakers below are full range
1 center
2 fronts L&R floor standing to the side of the screen.
2 front side axis L&R : (along the side wall eight feet in front of the main front speakers, mounted on the wall 5 ft off the floor...Y-connected from front channel.
2 surrounds mounted 10 ft off the floor on side walls 5 ft behind seating.
Proposed:
2 surrounds L&R 10 ft in front of seating, mounted 5 ft off the floor, Y-connected from surround channels.
...to make it a true 7.1 config...
2 surround back L&R 20 feet behind seating, mounted 10 ft above seating area, centered 10 feet apart. I have to re-read my manual to see if the rear surrounds in a 7.1 config are engaged on 5.1 material.
My system sounds really good as-is....I'm just trying to see if I can get better.
The Dark Knight in IMAX started all of this insanity.
To all of you, Steuspeed, Naked and Shadorne...thank you for your input, I really appreciate it....again, Audiogon has been a godsend for me in helping me put together my 2-channel and home theater systems.
...thanks again....mitch
.