Perfect Path Technologies: Omega E mat

Littlecx,

when I spoke to Tim a few weeks ago, he said that it helps his laptop run cooler but we did not discuss any sonic benefits in detail. We just ran out of time. You may want to give him call or just ask him through the forum. I think it may help since a lot of digital noise is generated from computers in general.

I guess I just asked the question.

 Very courious,

rc

I am impressed with the Omega Mats improving a system over an extended period of time. I placed one mat on the sub panel circuit breaker door June 10 and one on my Oppo 203 DVD player and Pass Lab INT-60 amp on June 18. This week I noticed further improved audio and video improvement with the AV system and  audio improvement with the stereo system.
I am pleased with the results on these three locations and have ordered additional Omega Mats to try with my SACD players, headphone amp, and on the main circuit breaker door.

I have found the improvement generated by each Mat  to be worth their price. It certainly is easier than swapping out power amps (my Pass Lab INT-60 amp does weigh over 100 lbs). Also the break in roller coaster (to me) is less than when comparing power cords and interconnects. Finally the cost to return the Mat with it's 30 day return policy makes it rather fun to try.

David Pritchard

Kedoades,

I have, over the last two years, spent considerable resources on power supplies, interconnects, powerchords, power plugs and vibration control devices. In my system I have had surprisingly good results in doing so. In that time I have not changed out any components. I have found that power conditioners and powerchords have give the most impact in reducing digital glare. Next the vibration Control devices brought out a more organic guality in the music. The interconnect upgrades have also aided in further reducing the digital noise further, thus extracting even more musical detail.

The Total Contact upgrade provided a stunning across the board upgrade to all the previous upgrades to my main and office systems. This upgrade was one of  the least costly of all the above mentioned upgrades save for the power plug change outs.

The cost of two Mats is just as an effective upgrade as The Total Contact and just as easily heard. I put the one that Tim sent me on my +/-15 year old CD player’s transport and it made it sound like a very decent analog rig. The second Mat, that I will pay for, was placed on the inside of the door to my breaker panel. Both systems improved subtlety during the first week and a half. At the two week point it really did improve both systems dramatically. Both systems are now sounding substantially less digital.

I hope this gives you anothers perspective on the value of the TC and Mat upgrades/tweaks.

Thanks,

rc

Ozzy ...

How did you end up with the Total Contact experiment in your system? Was it an overall improvement, or did you remove it before it settled in? I’m asking because the combination of the TC and the Omega E Mats, as "rc" said above, is quite dramatic. A startling improvement in my case. Steve (Fleischer) found the same thing in his system as well. Mribob (BOB) is testing six mats now with initial impressions that are very positive. He’s very conservative in his assessments, much like yourself. If you gave up early on the TC and removed it, my suggestion would be to get more TC and redo the system along with more mats. There has to be a time when your reaction would be ... "Holy Crappola!" :-)

Frank

I'm looking for suggestions here from those that have a positive experience with the E=Mat.
I received one E-Mat from Tim and placed it into my system #2 under the HFC MC-6 power distributor. I thought that might be a good location since the MC-6 feeds power to my Dac, Transport, preamp and FM Tuner. I left the E-Mat there for 5 days but did not notice any differences. Thinking that this might not be the best location for the E-Matt I switched it's location to my system #1 on top of my Yamamoto YDA-01 Dac with the magnetic backer facing up, and the actual working part on the E-Mat laying on my Dac. As of today, the E-Mat has been there for seven days, my system sounds as good as ever, however, I can't distinguish any improvements. Both systems 1 and 2 are audiophile quality, and if I do say so myself I believe I have a pretty good ear when it comes to making evaluations as to what I hear. I'm looking for suggestions as to what to do next? Leave the E-Mat in place for another week or try a different location?