Need to recap my Classe Audio DR-8 Amps - need suggestions

Classe Audio as it existed as an independent Canadian manufacturer when those amps and preamp were made does not exist anymore. 

You can try United Radio in East Syracuse NY or George Meyer AV in Los Angeles.

FYI: age is not a reason to replace capacitors. When they get worn out the amp will let you know with buzzing and loss of definition in the bass. If they work, leave 'em alone. I'll bet that's what those two will suggest as well.

kdross
I recently purchased two Classe Audio DR-8 amps. The amps were barely used and are in mint condition, but I think I need to have them recapped due to being over 20 years old.

No not really seeing they were barley used this should be tried first, all they would need is to be powered up very slowly 10-20 at a time over a few hours so all the electrolytic caps can "form" themselves again.
This can only be done by a tech using a big variac that can handle the power, other wise the variac will blow.

There is plenty to read on "forming old electrolytic caps" on Google.

Cheers George

Thank you for the responses.  My amps do not make any noise and are very quiet.  No popping, humming, etc.  My concern is after 1-2 days of connecting my DR-8 Classe Amps and DR-5 pre amp to my Thiel CS2 speakers, the woofers on both speakers went and need to be replaced.  I do not know what caused the woofers to go.  But I did play the speakers at a rather loud volume after installing the amps and wonder if that did my speakers in.  Just do not want to cause more damage to my speakers or amps.  

Sorry to hear about your woofers. I would put a voltmeter on the amplifier outputs and see if you have a significant DC offset. That is something that has the potential to take out woofers. If you have DC offset, it could be from something internally faulty or it could just need adjusting. Pretty straightforward procedure, put meter on outputs and tweak pot until it reads 0 +/- 1mV. Here is the procedure from the DR-8 service manual: https://www.hifiengine.com/manual_library/classe-audio/dr-8.shtml
Looks like same procedure as on my DR-10 which I have owned since new. I have no indication that my caps need replacing and I have been using for some 27 years now.