Perfect Path Technologies: Omega E mat

People please use common sense. As stated in its literature Total Contact is HIGHLY CONDUCTIVE. Painting the entire inside of a power conditioner is dangerous! They put "tamper proof" hex screws on there for a reason! Its very irresponsible for anyone, especially a manufacturer, to advise people to drill them out and offer to give advice on how to do so.

^^^ sbayne ...

The hex screws on my power conditioner were not "tamper proof." All screws came out readily .... although it took three differently sized "wrenches" to get them out. 

The power conditioner is unplugged from the power source before beginning any work.

Pasting contacts is pasting contacts.  What's the danger in pasting the connecting wires to the outlets in the power conditioner as opposed to pasting the switches in the circuit breaker box, the ends of an interconnect cable, the tines on an electrical plug, or the pins on a phono cartridge?

Just curious as to how you arrived at the "danger" aspect of this.

Thanks ...

Frank

I think he is referring to pasting the entire unit chassis, outlet sides, wires, caps, etc... and potentially causing an unintended conductive bridge leading to a short. It is a good reminder to be very careful and diligent.  Agreed? 

Frank  you said "Yes, paste everything inside including the sides of the receptacles (plugs), wires, connections, Caps, AND the inside of the chassis including the inside of the cover."

^^^

Ah yes, but I was very careful and used due diligence. :-)

As a result, nothing has exploded yet. The results are actually quite fantastic.

As a point of clarification, I didn't say to paste the "chassis."  Its one of the few areas I left alone.

Frank