Power conditioner or outlet?


I have a Shunyata MPC-12a power conditioner. Read that it was a good choice for audio equipment so I bought it. I also have high end power cords to all my equipment, as well as to my Shunyata.

I have recently read comments from listeners that you should plug your amp/preamp straight into the wall. Is that the case if you have a good power conditioner? I will do so if it is a better option, just concerned about no surge protection for the amps...but also don't want degraded sound! I am asking this because I am a newbie at all this, more money than audio sense. I am interested if anyone might have any experience in this
128x128easola01
If you want to understand the problem of contaminated power and how to clean it up, I suggest you study the information presented here.
https://www.equitech.com/lifting-the-grounding-enigma/
First of all I would question how many people can tell the difference between one very good power cord and another.

Second,If you share power with others and it’s not a dedicated line your own going to get a lot of stuff you don’t want in your system that will affect the sound. From other equipment like appliances in the home.
With no protection from surges.

I have had all the best power conditioners on the market my last one was an Audio Quest Niagara 5000 thay all have a tendency to chock the power of my Pass Lab amps. Just switched to PS Audio Power Plant 15 BEST Decision I ever made 

good luck
How does everyone feel about plugging their sub directly in to the wall outlet (or surge protector only) and skipping conditioning? Also, I have KEF LS50 Wireless speakers with amps built in. Should I go direct into the wall/surge protector with those too?
"Just switched to PS Audio Power Plant 15 BEST Decision I ever made"

Can you comment on what audible differences you hear after adding the PS Audio box? 
easola01
Like every tread that asked for others experience you'll receive
every side of a rubik's cube full of opinions .
So here is my side and my opinion , until recently most power conditioners could not handle the high current of power amps so
plugging them into the wall was recommended ,
which is where I plug my amp into .  
I have an isolation transformer that I plug my
turntable , phono preamp and CD player into , an isolation transformer
eliminates DC voltage and separates the ground from neutral .
I do not have a power conditioner , I went a different way .
I have all my electrical equipment plugged into Tripp-Lite
Isobar surge protectors , Refrigerator,  TV system , Deep Freezer , computers and Clock Radios ( I read where they are very noisy ) .
Years ago I had my stereo equipment plugged into one when my house lost the neutral feed , all I had was 2 x 120 lines entering the house , turn a light and bang . We lost a refrigerator , clock radios and a toaster
but my stereo system was saved AND
Tripp-lite sent me a new Isobar , they have " isolated " outlets ,
they filter between outlets so I am cleaning some of the noise before it gets onto the houses AC.
I also have 5 PS Audios noise harvesters on the circuit that my stereo system is on , as well as Green Wave filters on the circuits with motors like the refrigerator and deep freezer , and AudioPrism Quite Line noise filters on any circuit that does not have a Green Wave on it.

One misconception some have is that if you have a dedicated power line
that you are eliminating noise from other sources in your house ,
all that does is allow for fast current draw and no problems with connections .

I read another post about an electrical panel of 200 amps only being able to pass 200 amps , the ratings are for constant draw ,
a powerful amp on a 20 amp circuit could have instantaneous demands for 50 or more amps without tripping the breaker in the panel .

You could buy one power conditioner or you could try to protect everything in your house as well cleaning the electrical noise at the sources , theoretically everything should operate a little better ,
I know the TV systems seem to look and sound a little better .
And after moving the 3 different electrical noise cleaners around and finding how each one produced different effects I have a very clean sounding stereo system .
All together my little separates cost less that $750 .

Good Luck
Rob

P.S. I had taken my PS Audio Noise Harvesters over to my friends house, we plugged them in one at a time into both his Furman power conditioner and just the wall outlets ( before and after the incoming current on the AC line ) . The most improvement was heard when using all 5 that I have plugged into an outlet strip that was plugged into the outlet that his power conditioner was plugged into .
So even with a quality power conditioner you can improve your sound with other " filters " that are non-invasive .