2. analog
  3. 138748-18254

FR64 cartridge suggestions

Been out of the loop for quite a few years due to some 'life' events, with system in storage.

I have been able to pull my system from storage, and last year worked enough overtime to upgrade or purchase new equipment, but I have not upgraded my turntable/tonearm/cartridge yet.

My turntable is a Technics SL1000 MKII which for those not familiar, is the Technics SP10 MKII turntable mounted on a factory plinth.
I have two Technics B-500 bases with an 'E' armwand and 'H' armwand that I don't use.
The tonearm I do use is a Fidelity Research FR64, so I need a low compliance cartridge.
The cartridge I used last is a vintage Fidelity Research FR-1 MK3 F, which needs to be re-tipped, and I will do so once I get a replacement.

The rest of the system includes:

Zesto 1.2 Andros tube phono stage
Zesto 1.5 tube preamp
Quicksilver V4 tube amps (new KT150 version)
Green Mountain Audio Continuum 3 speakers
JL Audio 113 Fathom subwoofers (pair)

Curious what cartridges other high mass tonearm owners are using, especially those who use Fidelity Research FR64/66 tonearms.

Looking for cartridges under $2000 USD at most.. probably should spend half that.

I have over 20K records, so I am very anxious to get this back into service.

Really curious about suggestions and thanks in advance.



128x128Ag insider logo xs@2xrich121
lewm
12,560 posts
 
Nandric, You didn’t really answer my question directly, but are you inferring that the FR7fz, etc, are worth the prices you cite (and I’ve seen too) in comparison to the best vintage MM/MI and even some other used LOMC types, many of which can be had for far less cost?

i personally won’t pay that much for a 30+ year old cartridge coming from a foreign country, sold by someone I don’t know. I’d buy one from a trusted friend, only, preferably after an audition in my own system.
best-groove's avatar
best-groove
831 posts
 
Il mio suggerimento è di cercare Ikeda 9, il cosiddetto "cantileverless"
Ikeda 9 too many problems, it's a miracle when the channels are perfectly balanced.
chakster's avatar
chakster
6,144 posts
 
@best-groove i really like how you transform us to italian speaking persons :) 


lewm
12,560 posts
 
Rich, I purchased a replica B60 base, possibly from the same source, a few years ago. It is now in use with my FR64S. I have no complaints. It’s very well made. However, subsequent to my purchase, someone posted here (Audiogon Analog Forum) that he was disappointed in the replica B60 that he had more recently purchased. In particular, he denigrated the quality of construction, as I recall. So, I don’t know whether this is a case of a cranky perfectionist sounding off, or whether there are two different sources for the B60, one good (mine) and one bad (whatever the dissatisfied person bought). I looked at your photos, and I would have to go and carefully examine mine in order to discern whether the one for sale is exactly like mine, or not. Certainly the two are very close.

I found the old thread.  It was Nandric who complained about his sample of the replica B60.  It wiggled, side to side and up and down, even in set mode.  That, of course, is not acceptable.  That was in 2014.  Maybe Nandric can comment on what he thinks now.  My guess is he sold it. (Sorry to have referred to you as a "cranky perfectionist", Nikola.)
chakster's avatar
chakster
6,144 posts
 
This is how it works: video
More to discover