FR64 cartridge suggestions


Been out of the loop for quite a few years due to some 'life' events, with system in storage.

I have been able to pull my system from storage, and last year worked enough overtime to upgrade or purchase new equipment, but I have not upgraded my turntable/tonearm/cartridge yet.

My turntable is a Technics SL1000 MKII which for those not familiar, is the Technics SP10 MKII turntable mounted on a factory plinth.
I have two Technics B-500 bases with an 'E' armwand and 'H' armwand that I don't use.
The tonearm I do use is a Fidelity Research FR64, so I need a low compliance cartridge.
The cartridge I used last is a vintage Fidelity Research FR-1 MK3 F, which needs to be re-tipped, and I will do so once I get a replacement.

The rest of the system includes:

Zesto 1.2 Andros tube phono stage
Zesto 1.5 tube preamp
Quicksilver V4 tube amps (new KT150 version)
Green Mountain Audio Continuum 3 speakers
JL Audio 113 Fathom subwoofers (pair)

Curious what cartridges other high mass tonearm owners are using, especially those who use Fidelity Research FR64/66 tonearms.

Looking for cartridges under $2000 USD at most.. probably should spend half that.

I have over 20K records, so I am very anxious to get this back into service.

Really curious about suggestions and thanks in advance.



128x128Ag insider logo xs@2xrich121

I think that thinking is not possible without some assumptions.

But as logic ''prescribes'' if the assumptions are false then

all deduced statements irrespective of their ''logic'' will be

also false. As is, I assume, well known ''our Lew'' has always

some assumptions irrespective of his ''familiarity'' with the

given ''subject matter''. I have no idea why he assumed that

I sold my B-60 replica. The case is that I bought two samples

after my email exchange with the seller. My problem with my

sample was the ''steel pin'' which lead the up and down movement

of the construction. I asked the seller (producer) if I can get

this ''pin'' little bit bigger and made from ''gun metal'' . By his

answer the seller also told me that he will stop with production

because no profit whatever he could made. I got my ''gun metal''

pins bu also bought his last sample. So I still own two samples.

I changed the steel pins for ''gun metal'' kinds and also substituted

the sticky synthetic oil for (smooth) grease.

So thanks to my own improvement I am now satisfy with both my

samples (grin).

One of our most eloquent member ddriveman wrote this

article under title ''MC cartridge mini-shootout: SPU,KOETSU,

FR, IKEDA''. Together with three of his friends they compared

the mentioned carts + SPU (Silver Meister, GM, GOLD GM,

Royal GM) ; Ikeda 9CIII , FR- 7FZ; Koetsu Onyx Platinum and

Coral stone Platinum. Publishing
 time: 09-28-2014.

For the article I need to refer to the writing time. What  I want

to mention are the winners of this ''contest'' : ex aequo Coral

Stone and FR-7 fz.

As far as I know those are the owners of this remarkable

FR-7 fz: Dertonarm, Syntax, Don (Griffiths), chakster,

nandric and ddriverman. Neither of them had any problem

with suspension or other problems.

According to his buying ''philosophy'' Lew would never buy such

an old cart. He would  probably prefer the Coral Stone (grin).

 

I'd buy one from you, Nicky.  I was referring to the notion of sending US$2000 to some stranger living in Europe or Asia who is selling an FR-7fz on eBay, where the condition of the cartridge is typically described only as "used".  That's not much to go on for $2000.

I'm glad you ended up happy with your replica B60.  I'm happy with mine as well.

Dear Lew, I knew that you are sportsmanlike. I may be able

to post to you my Ikeda 9C,mk 2 to try. If the REX is better that

is. In about 10 days I will know. You get your best possible

scenario. First listening and testing than deciding.

Thanks for the thought, Nikola, but my current curiosity is mainly about the FR 7FZ.