balanced vs. unbalanced sound quality

Egrady,
You are right, the true is either type of cable may be the better solution depending on the system`s make up.
In certain configurations the RCA cables will be equal or better in sound quality. Audiofeil was right in saying it really does depends on the'individual' system(components involved and circumstances).For limo`s particular case the balance was the superior choice.There is no universal right or wrong here.
Regards,

So much bad information concerning balanced audio and the advantages. Balanced audio is not 2 signals, one 180 degrees inverted to eliminate common mode noise. That technology is used for digital transmission to null out any interference caused by environment or more importantly, other digital signals in the same cable bundle. Balanced audio utilizes 2 identical signal path circuits, one for each "leg" of your audio signal. The foremost advantage is that  there is no congested ground path for all signals, audio and power supply to distort the audio signal.  All currents through a ground path drop voltage due to small resistance.....noise!   Picture a toy slinky...both hands moving for balanced audio...Picture the same slinky attached to a table top on one end and only one hand moving for unbalanced audio....I'm not saying the difference is "huge"...but it has nothing to do with differencial noise elimination.

XLR has always been better sounding for me

I'm currently looking for a cdp that will blend well with my krell kav-300i and vanderteen 2c's. I recently picked up an NAD S500 cd player based on positive reviews and described sound quality. It sounded better with the krell versus other players I have tried (i.e. Rega Apollo). Both the krell and S500 have XLR outputs, so I decided to give it a try. Wow, the difference to my ears was rather substantial. Yes, there was a noticeable increase in volume, but more importantly, there was a more neutral sound to the music. It was much more even sounding, and was exactly what I was looking for. I kept the S500 connected in RCA as well and kept going back and forth, adjusting for volume each time. There was no comparison in this particular setup. The XLR connection was much better and provided a more even presentation of the music. My question to all this is: How is this possible? 

Units that have XLR output/input connectors (even if the internal circuitry is not "balanced" (2 identical audio circuits for the + and - leads)) take advantage of utilizing separate ground paths for each signal. Common ground paths are a huge factor in electronic noise. All currents flowing thru traces or wires drop a voltage in proportion to the current flowing thru it.  Keeping the ground or returns paths as separate as possible reduces the algebraic addition of all noise created by current flow. XLR wiring keeps left and right returns off the noisy ground path. Units with XLR connectors make an effort internally to accomplish that. Again, even if it is not a pure balanced circuit internally.