Help with XLR between Luxman L-509X & Hegel HD30 DAC


Hey there ... I have a Hegel HD30 DAC which will soon be plugged into a Luxman L-509X I'm awaiting delivery on.

Hegel says the best/preferred analog output of the HD30 is the XLR balanced outputs.

However, I have heard or read somewhere (I think) that either the Hegel or the Luxman has a different "hot" pin on their XLR connections.

Can anyone verify this, and is it something I need to be aware of when connecting the two via XLR? I always figured XLR was XLR, but I'm pretty sure I read somewhere that there can be different standards in the way these things are built. 

Thanks!
128x128jsqt
jsqt I have the CL 38U SE which Luxman just made 100 for their 90th Anniversary. I compared it to the $10k VAC and to me it was no contest. Plus the phono which has 4 step up transformers/the same 3 tube design as the CL 40. I would give it a shot w/the CL-40. If you have a TT I'm sure it'll sound fantastic. Luxman makes excellent tube gear but their solid state get's top billing. Both are great IMHO.
To be clear, the American standard is pin 1 ground, pin 2 **noninverting**, pin 3 **inverting**.
There is no 'cold' and 'hot'; both signal pins carry equal importance.
The Euro standard reverses the phase- the assignments of pins 2 and 3 are reversed.

So if you just hook up, the worst that can happen is the absolute polarity of your system might be inverted, assuming that the amp does not invert otherwise. However, exactly 50% of all recordings are inverted polarity, so this is really a non-issue. The only time you can really hear this sort of thing is when the recording is done with 2 or 3 mics in a true stereo pattern. Even then you need to compare to see which way is right (an inversion switch is handy for this as inverting the speaker connections of both channels is a bit of a pain in the rear).

Bottom line: don't worry about it!
@atmasphere  thanks for setting my mind at ease... wasn't sure if it would blow up my new amp or what, ha... good to hear that it's not that big of a deal.

@luxmancl38, very cool to hear you have the CL 38U SE. I am really curious how it would sound compared to my 35 year old CL-40, which underwent a total restoration at Luxman Japan in 2013.

The CL-40 is a real find - just shimmering sound and holographic imaging, plus the inset volume knob is an absolute joy to spin. There's no remote but I have no qualms about walking across the room to get my hands on it.
jsqt The tube layout is exactly the same. 3 12AX7's  for the phono preamp and 5 12AU7's for the preamp. In the SE they are using oil caps and the phono has 4 step up transformers 2 for MC high and 2 for MC low. Lp's have a lot of punch and are very quiet. I would venture they are quite similar. Hard to compare as Luxman only made 100 units so not a lot of owners around. This unit has a remote but it's very limited just volume and mute. Everything else you have to get up to do. By the way I'm using an RME ADI2 DAC w/this preamp. Very happy w/the combo. Art Dudley compared it very favorably to his Shindo preamp. It's listed as a Class A preamp in Stereophile.