... what is Settling Time in cables and interconnects...


Hello to all...

Was reading on a cable/interconnect manufacturers' site that they recommend min 350 preferrably 450 hrs Burn-In time, and 2 to preferably 24 hrs Settling Time (after plugged and unplugged).

Have never heard the term Settling Time: what is it, how is it done, what effect would it have if done or not done, AND MOST IMPORTANTLY - would like to hear from someone who has actually done this and your impressions...

THANKS!
justvintagestuff
Obviously when you’re not an audiophile this sort of thing doesn’t matter. Thanks for the reminder, glubson.
Hi sejodiren :-)
Dont forget the effect of suns radition & beam angles in different seasons.  That also affects the sound tremendously.  I hear the BEST sound usually on 21 June between the hours of 11:00am and 17:00pm in relative humidity of 78% :-)


Here’s my take on the OP’s question.

Settling-in would generally mean that a broken-in cable needs a brief period in an audio system to settle-in before sounding optimal.
If a cable has not had signal for a long period of time it may need a longer time to either, 1. break-in again or 2. settle-in.
Some define break-in and settling-in as the same thing although generally break-in would take a longer period of time.
Some reject the whole notion as ludicrous. Thus the collective groaning when this thread was posted.
As a newbie I see no problem in asking the question but be warned, the answers can be contentious and divisive (and occasionally vitriolic) so the wiser here tend to avoid the discussion altogether. Of course there are always those who are itching for a fight.
Hope this helps.
Is it so then that if I only disconnect the speaker cable for a very short moment to change to another speaker, I only need to give the cable the shorter settle-in time of maybe twelve hours before I with conficence can evaluate the sound of the second speaker to the first speaker. I really would like to get this right.
If burn-in by manufacturers works, then the positive effects must last several days to allow for shipping.
I don't think you need to worry about minutes or hours or even a couple of days.
Once any cable is physically moved, it needs a little time to settle once it is back in action again, so the gap period isn't crucial.