Fidelity Research FR-64x


 Fidelity Research FR-64x.....(with silver wire ).  Is this arm still considered  viable today ?

offnon57
Dear @lewm : I podted because your comment that could make your own alignment and you are rigth any one can, that was an example.

I'm posting here even that the FR tonearms are a bad design because the owners like you  can improve the quality performance level in the FR tonearm. I know that you don't care then is not for you but for the ones that cares about  making some " simple " changes in the overall alignment set up all can do it.

@ivelchev did it with out changing the P2S distance.

My take here in this alignment regards and with any pivoted tonearm is always that tif he arm board and tonearm headshell permit it set up the alignment choosing Löfgren A/Baerwald or B with a bit longer length that the manufacturer spec for effective length. How much longer?, as the set up permit it.

In that way the tracking error will goes down as the distortions levels and these means that we will have/listen more groove recorded information with less/lower degradation. Worth to do it .
That's why I told you to test 247mm/250mm on effective length using Löfgren A/Baerwald, you will receive better quality on what you are listening today. No doubt about. No, I don't care if you do or not.

Again, I know that you don't care and like in your Dynavector tonearm set up you follows the manufacturer specs even with higher distortions but that's you.

Through the years I learned the critical importance of turntable/tonearm/cartridge alignment set up and the importance that the set up be made it with accuracy.

Regards and enjoy the MUSIC NOT DISTORTIONS,
R.


I got my FR-64s from the postman today. Soon i’ll be able to compare FR64fx side to side to FR-64s. Both arms are in perfect condition, but my 64fx is almost like new. I’ve been using my FR64fx with original W-250 (30mm long) superheavy counterweight, this weight does not comes with the arm, it must be purchased separately and it’s extremely rare.

The weight which i got on FR-64s is smaller (25mm long), probably it’s not the heaviest among those 3 different weight designed for FR-64s tonearm? Is that a medium weight @nandric ?

I have not mounted FR-64s, but what i can say immediately from the first look is that the armbase design of the 64s is awful compared to the beautiful 64fx armbase !

1) The base of 64fx is much bigger and thicker, it has two screws that does not require any tool to adjust/fix VTA of the tonearm quickly and easily. Actually there is no need for optional B-60 for 64fx!

2) The 64fx armbase has 3 vertical screws (tiangle) goes throught it to fix the armbase to the turntable base. The 64s does not have anything like that!

3) Then there is a huge nut under the base on 64fx. The nut of the 64s is much smaller and if we don’t have super expensive optional VTA on the fly base (B-60 for 64s) then mounting process is completely different compared to the 64fx tonearm.

4) Basically the 64s has some sort of thick washer and nut to fix the arm, the VTA can be fixed with two screws, but only with a tool. While the 64fx can be easily fixed manually first and then tighten up with a tool.

5) Tracking force ring on 64fx is much better! This ring works like an expensive safe lock, the movement of the ring is fixed step by step while the tracking force ring on the 64s has free smoth movement.

6) Curved pad of the armlift on 64fx is metal, while this pad on 64s is plastic (too bad).


*** In my opinion the Fidelity-Research FR-64fx toneam build quality and usability is much better than 64s ! Many mechanical things were improved on "fx" version. The FR 64fx tonearm is more user friendly for sure.

** Now i understand why each owner of the 64s is looking for B-60, but the owners of the 64fx shouldn’t worry about it.

* Later i will check is it true that 64s has better sonics than 64fx, but at the moment my choice is 64fx for many reasons described above.


I have recently received a FR 64s as well along with the B-60 and a FR 7f cartridge.

I had to make a new bore in an arm board to accommodate it and have yet to mount it. It is ready to go --so I will be interested in your comments for geometry and  any other tips.

I will report here as well .

Thanks,
@nkj nice, i wish i could add that B-60 base and N-60 stabilizer to 64s.
The 64fx is good as it is, in its stock condition.

I use Stevenson geometry with my FR-64fx + FR-7fz cartridge, as recommended by the manufacturer (Ikeda San). With this cartridge you can not change the geometry as you simply can’t twist the cartridge in the "headshell". With conventionel cartridge you can change the geometry, but not with a headshell integrated FR-7 series.

Dear chakster, In my FR manual only the small FR-64S (170g)

and heavy FR-64 fx (250g) are mentioned. I own, next to 170g,

also 250 g weight for my FR-64S. The later is according to me

the standard weight. I never needed heavier kind. But do use

the 170 g for light cartridges. I mean MC kinds in my case but

this should also apply for the most MM carts.