JVC tt-101 repair

Got a JVC QL-10 with a 120V TT-101. Speed is wonky. Sometimes plays fine, sometimes spins a 1000 RPM, somtimes runs forward & then backward. Could use some help.

gary705-15-2018 12:44am

...
99 posts total
View entire discussion

chakster Details Discussions Posts This discussion 6,144 posts 11-11-2018 at 06:48pm Copy Comment URL Report Comment Edit Delete The easiest way is just to copy an url of a piture uploaded to facebook (or anywhere) by chosing this option with a right knob of your mouse, and post that link here.
tzh21y Details Discussions Posts This discussion Message User 1,654 posts 11-11-2018 at 07:35pm Copy Comment URL Report Comment Edit Delete great table. Its good to know that these tables can be repaired.
best-groove Details Discussions Posts This discussion Message User 842 posts 11-11-2018 at 07:40pm Copy Comment URL Report Comment Edit Delete Its good to know that these tables can be repaired. maybe it was true !!! It's not easy at all, they all have the same faults.
gary7 OP Details Discussions Posts This discussion Message User 73 posts 11-12-2018 at 12:19am Copy Comment URL Report Comment Edit Delete https://scontent.fatl1-2.fna.fbcdn.net/v/t1.0-9/46076604_2176113089066614_1829707453084729344_o.jpg?... https://scontent.fatl1-1.fna.fbcdn.net/v/t1.0-9/46014163_2176113455733244_7414367283914473472_o.jpg?...
gary7 OP Details Discussions Posts This discussion Message User 73 posts 11-12-2018 at 12:37am Copy Comment URL Report Comment Edit Delete What I have now will do till I get more adventurous. Should be fine with the weight of carts I have. From that site, it seems the outer tube does screw onto the brass shaft. But the collar on the gimbal housing allows the brass to turn, so the outer tube won't screw out, or tighten down. There are 2 tiny set screws bellow the collar that must hold the collar in place, but I'm kinda worried I'd strip them out.

99 posts total
View entire discussion

More to discover