Running Benchmark AHB2 in bridged mode and 4 Ohm Speaker

@kijanki  Yes, drop across resistance will double, but reserves in power supply combined with the feedback will make up for that.

I dont see why it is a virtue especially if it is just a spec and not what is really going on. Has Stereophile tested any of these amps. Please provide a link.

I never said it is a virtue - just the opposite.

I, prehaps misinterpreted this statement as something you agreed with.. 

 

Exact doubling of the power is treated on this forum as a virtue.

 Under RMS testing (which I have responded to in your other thread) there is no power suppy reserve, its flat out. 

Please tell me how feedback is going to find power where there is no more. Feedback does not create power. Rather than keep telling me it does tell me HOW it does.

@douglas_schroeder    When I refer to "level unlimited" I mean that the amp is at maximum output of the preamplifier turned full on and the speakers not hitting past perhaps 87-88 dB. I would call an amp "level unlimited" where in my use I would not turn the level up more, but the amp could certainly provide a higher listening level. It may not be a technically correct description, but it serves to indicate the situation. I do not attempt to listen to systems at "live", i.e. above 90 dB levels, and I do not recommend others to do so

It appears you may be confusing gain with power as many do.

I mean that the amp is at maximum output of the preamplifier turned full on and the speakers not hitting past perhaps 87-88 dB.

This is the statement I do not understand. The amp is doing what?

The top setting on a preamp does not conform to any percentage of the power amplifier's potential output. Some systems max out on power at 9 on the clock. some at 12 some not even at full up, which is a good situation where the 9 on the clock is very bad, though I hear some like it as they think there headroom above that setting, where there is not. 

90 db is a nice listening level, however do you sometimes find a CD might not get to 90 at full preamp level? And of course some will be too loud.

ramtubes
It appears you may be confusing gain with power as many do.

He is, by me too.

douglas_schroeder

The amp is FAR superior sounding in bridged mode regardless of the speakers used, efficient or less efficient.

I ask again, then why sell it in stereo mode if it’s so hobbled in stereo mode???
You should then be suggesting that no one buy it for stereo mode listening there are far better offerings.

douglas_schroeder
I have said several times previously that there is NO sonic degradation in bridged mode, nor distortion associated with running the amp full out.

This is a furphy, I didn’t ask that half a page back, I asked a simple question of amp sound quality driving the Kingsound III it was ignored. I present it again.

"How did one stereo amp sound to a level it was totally comfortable at.
Then the bridged ones at the same level?"
"To gauge which sounded better."
"NOT WHICH COULD GO LOUDER!"

I think it all needs "paralleled interconnects attached to each channel", that should fix the problem/s.


Cheers George

@georgehifi 

I think Benchmark has done an excellent job of convincing everyone to buy two. Hail to marketing. All those who follow can do is quote the party line. We will never get them to understand. 

ramtubes
I think Benchmark has done an excellent job of convincing everyone to buy two.

Got a feeling there’s a couple of latent shills helping out too.

Cheers George