2. amps-preamps
  3. 141125-122621

Do I need a specific type of 4 gauge wire for my monoblock amp?

I purchased a JBL BP1200.1 monoblock amplifier, for the subwoofers in my Cobalt. It did not come with any wiring. There are 3, 40amp fuses on the amplifier. I think that means that the power cable that I hook up to it, needs to have a fuse that is at least 120 amps. I ordered an amp wiring kit online, and it comes with an in-line 80 amp fuse. 

My question is, can I buy and ANL fuse holder to replace the in-line fuse holder on the power cable? And do I use a 120 amp ANL fuse, or a 150 amp ANL fuse?
thirdeyethirdear
erik_squires
16,063 posts
 
As I read it, all fuses are on the amp. 

https://pdf.crutchfieldonline.com/ImageBank/v19990822101700/Manuals/109/109BP1200.PDF

If you want to be save, the specs say the maximum current draw is 113 A, so 120A would be acceptable. 
thirdeyethirdear OP
9 posts
 
Thanks for responding. So if I switch out the fuse holder from an 80 amp in-line fuse, to a 120amp ANL fuse, the 4 gauge wire and amp would be safe? I've never hooked up an amp to a car before, and I'm just trying to be as safe as possible.
cal3713's avatar
cal3713
1,421 posts
 
Not many car audio conversations around here... You might consider posting elsewhere if you don't get many replies.
More to discover