Nuforce STA200


I am curious about the Nuforce STA200 amplifier  If anyone has experience with the amp it would be appreciated if you would share your listening impressions, both good and bad.  Some of the descriptions I have read classify it as a class AB amp and others a class D amp.  I am not technical savvy about these things, can a single amplifier be both? 
Thanks
George
jetter
My STA200 is also dead quiet. Have used it with two speakers of 6-8ohms, 87dB for limited hours as it is new  Might be a compatibility problem with your preamp. Does hiss get louder as you turn up volume? Usually a gain driven hiss problem becomes more a concern with highly sensitive speakers. That said, I would not choose this amp for use with a speaker having an average load of 4ohms (see discussion above). 
I've had no trouble with 4 ohm speakers...currently Dynaudio Focus 220 mkll...
Jl35, that is good to know. The speakers I own are rated higher than that, however do drop below 4ohms in the bass region. Phase angle at these frequencies is benign however. In what size room is your system?
smallish room, about 12x14...I think the amp is fine into 4 or 8 ohms, as long as it is looked at as a fairly low power amp, which is what it was designed as...many amps put out same or similar power into 4 or 8 ohms, such as McIntosh...