Audio only processor - without video?

Well, I just bought (on Audiogon) a Placette passive preamp for 2-channel use. It also has a set of inputs I can use for the front L/R home theater setup. So the only issue I have regarding audio is home theater processing.

The fact that most better HT processors have better video conversion chips is interesting, and the sort of info I'm looking for. I'm currently using an Outlaw 990 but have the video directly to the TV. Should I be going through the processor?

The other point of my question is that I may be looking to upgrade, and wondered if I needed a unit with video inputs at all.

Thanks to everyone so far, and if you all can add anything, great!

Seditious3,

The fact that you will be using a 2 channel preamp downstream of the processor is exactly my point. Many of the top BD/DVD/Universal players have very good internal Dolby TrueHD/DTS Master Audio/Dolby Digital/etc processors built in so that you can come straight out of their analog outputs to your preamp when listening to 2 channel Dolby/DTS encoded lossless BD/DVD's (hopefully there will be more of those in the future) or SACD/DVD Audio. This eliminates the processor (and it's non-defeatable analog section) from the signal chain for serious 2 channel listening.

Regarding eliminating the video inputs on HT, I think you will find that the whole multi-channel HD signal chain (source -> processor -> display device/amplifiers) is built around HDMI which automatically incorporates video, so your concern is somewhat academic. As Kal points out, the advantages of running video through your processor (switching, video picture adjustability) outweigh whatever small negatives that concern you.

For example, when I am watching HD sources, I set my processor's video setting to "Through" (bypass), but I engage the internal Reon video processing on non-HD sources to reduce video artifacts (clean up the picture).

Well put Dl - thanks.

Thanks Bob - next processor will have HDMI for HT.