driving Verity Audio Parsifal Ovations?

Thanks - I was making the assumption that they were both class AB.

Toronto,

I was actually trying to provide you with a different data point. Basically, my experience with the P/Es suggest that 120 wpc of ss power should mate well - so, if you like a particular 120 wpc ss amp, you're probably good to go. OTOH, 30 wpc might -or might not - be an issue. So, if you're headed down this path, proceed with more caution.

Beyond that, I have no direct experience with the Luxman units. So take my comments as a FWIW.

Good Luck

Marty

Thanks.

The Luxman 509u puts out 120 wpc at 8 Ohms, doubling to 240 wpc at 4 Ohms. The Parsifals are relatively sensitive (89), are rated as 8 Ohm speakers with a minimum impedance of 4 Ohms, so the Luxman amp should be a good match.

I am less sure about the merits of 30 wpc class A power vs. 120 wpc class AB power.

Regards,

Mark

I drive my Parsifal Encore with ARC Classic 120 monos (115 watts) modified by GNSC with stunning results. Preamps are ARC REF2 MKI and REF Phono modded by GNSC as well.
Verity makes great sounding speakers throughout their range.

IMHO, class A produce better texture and grip within the power range. The M800a is rated at 60W into 8ohms but will provide 160W into 8ohms before clipping according to stereophile measurements and over 200W into 4. 590a probably do more than 30W into 8ohm.

also depend on the room size and how far are you from the speaker