Upgrade from Technics SP25

Dear @gotog: You have a good turntable as is the AT tonearm that I know very well.

Use your money in the cartridge and you will love this great quality performer at an excellent price. If I were you I just pull the trigger inmediatly:

https://www.audiogon.com/listings/lis9abf0-lyra-kleos-cartridges

The Kleos is at other level ( better. ) than many other cartridges in the 4K-6K price range


Regards and enjoy the MUSIC NOT DISTORTIONS,
R.

I am looking for an upgrade that digs a little deeper and extracts more detail.

No wonder, your conical DL-103 diamond simply missing the extensions on both ends due to natural limitation of the contact surface associated with any conical/spherical profile. This is very well explained here.

If you want to keep using Low Compliance cartridges with your tonearm (which must be high mass) then you have to upgrade your cartridge first. If you’re in love with the Denon then all you need is to replace the whole cantilever/stylus on this cartridge to something modern such as Ruby/LineContact which you can do with a help of any retipper such as SoundSmith or many others (for the cost of lower than new Hanna MC).

If you still looking for something fresh and another cartridge is what you need then you can still buy a much better cartridge for your tonearm to try first. I would recommend Fidelity-Research PMC-3 low compliance MC cartridge with nude Line Contact diamond, Air Core Coil ! If you can’t find it just ask me.

Another decent upgrade for the Denon 103 aficionado is definitely the Ortofon SPU Royal G mkII with the most complicated profile in the history - The Ortofon Replicant 100. With this profile you will extract maximum from your records. Also no need to change the arm if it can support about 30g cartridge/shell. Forgive me, but i will link my listing, so you can read amore about it.

Doing my research for the best low compliance cartridge i ended up with mega rare FR-7fz, but i think this cartridge alone exceed your budget.

However, FR cartridges and SPU cartridges are all voiced with alluminum cantilever (and nude pressure fitted line contact type diamonds) and does not require an exotic cantilevers to sound absolutely fantastic. That means the service of those cartridges is much cheaper, even if you need a brand new cantilever with new tip, any retipper can do that for you for extremely low price, compared to the exotic cantilevers like Boron.  

In my opinion you have a nice DD turntable, if your plinth is fine then i would definitely recommend to start with a new cartridge, the DL-103 is the weakest part on your tunrtable if you’re looking for much more detailed sound.

If you need a mid or high compliance cartridge then it’s another story and you could try an MI or MM, but you have to check for tonearm effective moving mass with the lightweight headshell/cartridge to avoid undesirable resonance.

@raulirugas,@chakster thanks for your advice

gotog, this is not to suggest you upgrade your table, Raul and chakster have given good advice.

However if you are not aware I thought you might like knowing more about your table.  Technics offered three SP model tables at different price points.  The top was the SP-10 Mk 2 (initial SP-10 underwent many upgrades), later upgraded to the Mk 3.  Next downward was the SP-15.  This was also a high quality unit with a large heavy platter, fine tune speed adjustment but with onboard power supply.  It was also good enough for studio use as well as consumer applications.  Then came your SP-25.  From my reading that is essentially the motor and electronics from the famed SL-1200 series.  Most parts are interchangeable.  However it was a motor unit only, allowing for selection of separate plinth and tonearm.  As the reputation for the SL-1200s suggests, your SP-25 can punch above its weight.

All this is offered for future reference.  I wouldn't spend $2.5K for a cartridge in your system but there must be many upgrades, including a retip of your Denon.  You didn't say how many hours on yours but the conical stylus will not likely satisfy anyone looking to dig deeper and extract more detail.

Good luck.