2. digital
  3. 144115-118117

If you want to get the best of your transport, try this.


http://www.symposiumusa.com/rollerblocks.html 

I had used these three roller blocks under CEC TL0x for 5 years about 15 years ago and now I am using them under Jay's Audio CDT2 Mk2.

There are two different balls. If you can afford, the super ball is recommended for more effect.

With these roller blocks, transport give higher resolution and sharper focus.

I think it's effect is more than good digital cables.

But I recommend combination of roller blocks and good digital cable to get the best of your transport.
128x128shkong78
Post removed 
stevecham
3,340 posts
 
https://www.supplyhouse.com/DiversiTech-MP-2E-EVA-Anti-Vibration-Pad-2-x-2-x-7-8?gclid=EAIaIQobChMIu...

E.V.A. Anti-Vibration Pad, 2" x 2" x 7/8"

Box of 48 for $26.40. The best anti-vibration blocks around!!!
uberwaltz's avatar
uberwaltz
13,381 posts
 
Steve
I have been using those under three of my TT for some time and cannot complain at all in relation to cost for effectiveness!
zipost's avatar
zipost
199 posts
 
Placing these small air tires works best for my equipments!

https://www.dubro.com/collections/tires-wheels/products/big-wheels
audioengr
3,282 posts
 
Like polishing a turd.  

Instead, just add a Synchro-Mesh reclocker and you will get 7psec of jitter no matter what transport you use, no matter what treatment you do to the disks, no matter what feet you put under the transport.  It will make any device a world-class digital source.  SM is more than $400, but the improvement is drastically better.

If you believe feet are a better solution than a really good S/PDIF coax cable, then you have tried the wrong cables.  Every cable should be 1.25m long at least and the coax terminated to BNC connectors, not RCA's.  Use RCA adapters when needed.

Steve N.

Empirical Audio
More to discover