Thiel cs2.4 upgrade to cs 2.4 se

A measured of 30.1ohm on the coax xover makes sense.  Based on the coax xover schematic, there is a 30ohm resistor in series with the resistance of the 0.15mh.  The typical resistance of a 0.15mh inductor is probably in the range of 0.1 - 0.3 Ohm.  So if you add both together, it's about in the range of 30.1 - 30.3 Ohm.

In my experience, Clarity cap tends to sound slightly mid range forward.  The CS2.4 driver being very transparent so this may explain the perceived lower bass response balance.

Sorry guys, i still have yet to send my amp for service.  Just excited with beetlemania resistors upgrade.

Updates about my Thiel's 

https://www.diyaudio.com/forums/multi-way/332679-thiel-cs2-4-xover-schematics-2.html

Today I made a recording of my installation with the song Takla Makan by Yello, sound recording was made with a Tascam DR-40 v2 in the format WAV 24bit-48k, the video is just from my phone.

Now is You-Tube not the most suitable medium for sound and often there is no option to listen to it optimally via the equipment You-Tube plays, so also a link from the original sound file for download so you can directly put the file in your music streamer for the best result.
This recording gives only an impression and is far from how it sounds 1: 1 but I thought it would be nice to share it.

Original sound file out of the Tascam:
https://free01.thegood.cloud/index.php/s/WjKpX2wADS37x8H

You-Tube link:
https://www.youtube.com/watch?v=T_CIpgiH5Zo&t=117s

holco
Outstanding! work.  Happy Listening!