AirPlay - "Best" solution help...
My goal is to build a cost-effective, high-quality, AirPlay-based streaming solution and I seek your help.
(I have chosen AirPlay for MANY reasons and would prefer not to debate its merits, please;-)
My simple needs are only two channel, one room, iOs only, independent system consisting (today) of:
Belles Soloist 1 Integrated amp (possible Aria soon)
Apple TV(Gen3)>TOSLINK>iFi SPDIF iPurifier> Peachtree DACit
Dynaudio Focus 140s (Special 40s in the mix)
MacBook Pro server running Audirvana+.
DH Labs cables
Yes, I know that the DAC needs upgrading. But, this set up sounds pretty good. It’s in the budget.
My room is small (9x13’), in the basement, well insulated with dedicated AC lines. I have had all kinds of systems over the years.
Options to improve the AirPlay/DAC “front end” include:
1. Get an Apple Airport Express and a better DAC with jitter attenuation
2. Get a streamer like Bluesound (does AirPlay) and a better DAC
3. Get a combined streamer/DAC (Cambridge Audio, Auralic, etc.)
My budget peaks at about $1,500 all-in for the time being. Am aware of the jitter issue and of products from Empirical and W4S
My current thinking is to get an AAE (doesn’t upsample like ATV) and a Benchmark DAC2 or a Bluesound Node 2i and a Mytek Liberty.
Welcome all thoughts here.
Thanks.
Ian
- ...
- 10 posts total
@ljgerens The iFi Purifier is more for extremecases, like 30ft cable runs and whatnot. It adds some low frequency noise and distortion due to its power supply and whatnot, but should be low in level. Here are some files with varying amounts of “jitter” (and measurements of the “jitter” added for each variation is shown). Unless your source and/or DAC just are horrible in regards to jitter and jitter suppression/reduction, you don’t have to worry when music is playing (maybe, just maybe it’d be an issue with single frequency test tones). |
@mzkmxcv Thanks for your comment. I only mentioned the iFi Purifier because the OP has it listed in his setup with his Apple TV and I wanted to describe my experience with it. I only tried it because of all the discussion regarding jitter from an Airport Express and the iFi Purifier was recommended to eliminate jitter. My systems all sound great but I was curious if something (not sure what) could be improved using the Purifier. |
OP I think that your current plan sounds great. My only reservation would be using AE, since Apple no longer supports it. The poster that has not noticed a difference between AE and ATV for AirPlay is very helpful. Also be aware that with Bluesound it is the 2i version that does AirPlay, and since they have just added that capability they not have all the kinks out of it yet... |
Thanks for the input, all. The iFi iPurifier was a positive addition sitting between ATV3 and a sort of old entry level DAC like the DACit which we had been using in our family room upstairs. I put it in my office system when I sold the Arcam Airplay. The Arcam worked OK, sounded good, but was very rigid in practice. im sure the Micromega is “killer”. For $4,500, it better be...;-) i have found that 90-93% satisfaction can be achieved with cost effective solutions. Chasing diminishing sonic returns for the last 7% is a tiresome and expensive exercise that I have long abandoned. i seek to follow the same solution with streaming. i was at the local Naim dealer last weekend. I once had a full blown Naim system. Dealer was adamant that you need to spend $7k+ to get the new digital front end done “right”. He’s delusional. my current lower end system sounds really good. I’m at 85%. Just will prob get a new DAC with better jitter attenuation and see what happens. |
- 10 posts total