Andy - same coax but higher crosspoint to the 8" 2.7 woofer requiring 416uF series blocks. 400uF electro + 15 PP + 1uF styrene / tin foil. The lower 3.7 crosspoint needs 226uF as 3x75uF PPs plus the 1uF S/T. ( no Es in the 3.7 signal path.)
As I've mentioned before, Jim wasn't alive to apply his typical methodology, which would have been using the coax he was developing for the 7.3 to feed the 2.5 just as the 2.4 had been fed by the 7.2 and the 2.3 and CS7 were co-developed.
That jujitsu of dropping the 3.7 coax into an 8"model 2 and calling it the 2.7 is not Jim Thiel methodology, but rather a way to use an extant driver in a fall-down product, creating a model 2 more similar to the 3 in performance and cost.
You are right, big film caps are expensive. Note that the 2.4 upgrade requires only 42uF series feed caps.
As I've mentioned before, Jim wasn't alive to apply his typical methodology, which would have been using the coax he was developing for the 7.3 to feed the 2.5 just as the 2.4 had been fed by the 7.2 and the 2.3 and CS7 were co-developed.
That jujitsu of dropping the 3.7 coax into an 8"model 2 and calling it the 2.7 is not Jim Thiel methodology, but rather a way to use an extant driver in a fall-down product, creating a model 2 more similar to the 3 in performance and cost.
You are right, big film caps are expensive. Note that the 2.4 upgrade requires only 42uF series feed caps.