What is the correct way to use the Zerostat?

Discwasher used with D4+ fluid is the best thing before using the ZeroStat. 

Lewm You can contradict me all you want.
Zerostats will kill static VERY temporarily. Like I said before the stylus rubbing the groove puts the charge back on in a hurry attracting dust to the record and there is plenty of dust in the air just look into the beam of a flashlight in a darkened room. The static and incidental dust are the reason you need a grounded sweep arm. It kills the static as it is being made. There is absolutely no downside to using a dust cover. They keep dust off the record and your delicate tonearm and they also decrease the decibels around your cartridge, arm and record. 
If you have a complex table like a Basis or VPI it makes keeping the table clean much easier. I would never use a table without one. The myths perpetrated against dust covers were generated by manufacturers who could not easily attach one to their table or by people who have no idea what they are talking about. When humans have no idea what is going on
they make stuff up. They mythologize.  Zeus throwing lightening bolts is a good example. The mythology surrounding Audio is second to none. I have fallen for it on several occasions. 

It seems you worship a different set of deities. I don’t and didn’t argue that a dust bug doesn’t work to reduce debris in the path of the stylus. And if you like dust covers, that’s fine too, but not for me and most others, when playing music.

Lewm,

The argument was not over the "dust bug" but over whether or not Zerostats work. If the goal is to keep Static and dust off the record they do not, particularly if you do not use a dust cover. If you use the Zerostat and quickly drop the stylus and shut a dust cover you will have less dust on the record during playback but you would have to use the Zerostat immediately on opening the dust cover to keep the dust from flying to it and messing up the next playback. If most people do not use a dust cover it is mainly because their table was not supplied with one not because there is some magic audiophile mythology not too. It is my contention that because the dust cover lowers the volume surrounding the cartridge and tone arm that tables with a properly mounted dust cover sound better. If you have an un suspended table you can not mount the dust cover to the table which is why all mass controlled tables do not have a dust cover. You have to mount the dust cover to whatever the table is sitting on which makes things a bit more tricky. But you can order your cover here  https://stereosquares.com/ and you can get hinges here
https://www.fullcompass.com  and with a little elbow grease, a drill and some cyanoacrylate you can have a really nice hinging dust cover. Put felt pads under the corners so it does not rattle. 

I recently purchased a new Milty Pro Zerostat 3 and have been researching the most effective way to use it. The instructions on the box are lacking. It is obvious that just the act of playing a vinyl record, the stylus running through the grooves, creates static electricity. Depending on the atmospheric conditions at the time can affect it. After playing through a record, so much static electricity is created that the cork/rubber turntable mat comes off with the record and is stuck to it. Putting the record and mat back on the TT, I used the anti-static gun and it did not neutralize the charge. Either I am doing something wrong or the gun doesn't work.
The Milty gun came with a separated black plastic cap. It is NOT a light. From my research, putting the cap on and holding the gun near a grounded item, like a faucet, slowly pulling and releasing the trigger does nothing. Pulling and releasing it quickly, causing a click, I can see a spark jumping from the gun to the faucet.
Some types of record formats are more affected by static electricity than others. For instance, the CD-4 discrete quadraphonic format depends on a 30khz tone to split up the channels. Static electricity can reek havoc with this format, resulting in pops during playback. They are not always in the same places on the records, so I would think that this is caused by static electricity. The Zerostat 3 has had no effect on this.
Does anyone have any tips or pointers?
Thank you!