Merlin vsm mme owners, Cardas cabling Question.


HI, just purchased an used pair of merlin vsm mme,replaced my Von swheikert VR3, my Question is, why cardas cables are so critical for this speakers, had cardas cables before, speakers and interconnect, and heated the sound of those cables, very muddy and slow, bass all over the place,coulnt'pull them out fas enough,
my preamp is joulet electra 150mk11, and I'm really scare to spend $3000,or more on used cardas GR,cables,now I'm using KCI silk worm with analysis solo cristal I/C, sounds good, but a little thin, great midrange, but not full body sound, that I'm acustom to, what will cardas bring to the table , in this situation.

your coments wil be apreciated;

thanks:

Cheers:
juancgenao
9rw, I have used CAT, Pass, Quicksilver, Lamm, ARC, Placette, and a few other pre/amp combos with the Merlins. The reason I have what I have is they work well with the Merlins, that being said OTLs will work incredibly well with any speaker that is tube friendly, which the Merlin is. With all the amps I have tried, nothing beast OTLs to me, and the reason Merlin is often recommended with Joule, is the fact that it happens to be an OTL, so it does not shock that Bobby would go that way, though he liked the CAT gear too. That amp/speaker interface is so important to get right, perhaps the most important part of getting a system right that I think you would have to be crazy to not take advice from a speaker designer that suggests what he thinks will work best. I think there is some truth to the perception that some may fear that gear not on "Bobby's Approved List" might not work well. That should be nipped in the bud, as the speakers certainly work well with any of the tube amps I have used, and the Pass XA30.5 as well. But there is a tendency to believe that if Bobby does not mention a particular amp or cable then it won't get the best from the speakers, that can get dangerous. Probably why most manufacturers will stay away from recommend to specically a particular amp, power cord, tube, etc for their speakers. For the most part Bobby has chosen well and I think most folks have been happy with his recommendations for accompanying products. If you don't want to experiment too much and possibly waste alot of money, Bobby's recommendations seem to be right on the money (for his speakers).
Call the Cable Co. and have them send you a full set of Cardas GR and evaluate them. I have Bobby's full receipe with the Fila integrated and it is the best all around system I've owned. I've had Soundlabs, Maggies, Acoustats, Quadratures and Martin Logans. Bobby's system has an organic natural quality that I've never heard before and I'm basically a planar/electrostatic guy. Pretty damn hard to beat in my opinion.
Be sure you are using the Cardas Golden Ref or one of the other more transparent Cardas line. The Cross line are slightly warmer but also slower and more opaque. I like Cross mainly with lower priced transistor gear that is a bit unrefined on the top end.

Using all the cardas GR cables (Interconnect, speaker and power cables) SURELY spoils the sound. IMHO use a silver cable between BAM and preamp/integrated (i used siltech classic annversary 330i)...I was just about to sell Merlins before i tried this.....now merlins will stay for ever in my main listening room... IMO do not underestemate sound of merlins after using all Cardas GR cables.... Merlins are one of the very very best speakers available....do not spoil the sound with all Cardas GR cables... and later complaint the sound of merlins and sell it.... i know people who have done that