Hi All
Just found this thread on the EX-M1 and wanted to share my setup. It previously consisted of a quad 405 copy using an Onkyo TX-NR809 as a pre-amp. Speakers were Dali Concept 10 towers(91db) . I purchased some replacement BIC speakers late last year RTR-EV15 (95db), as i felt the Dali's were under-powered with the Quad copy. Fast forward to March 2019, i now have an EX-M1 that has replaced the Quad. A Denafrips R2R Ares DAC which replaced a SMSL sanskrit proB and UPOCC Copper Litz XLRs joining the two. The Onkyo is on movie duty only now. I have gone back to the Dali speakers too as this amp has the power to feed 4 10" drivers, and spades in reserve. Speaker cable are Van Damme Blue Series studio grade. Awaiting the final replacement to the system...one of three last sets made, VAF Research DC-X63 towers which should arrive some time next week.
Review of the Kinki...as i purchased the amp and dac together the comparison to my previous gear is probably unfair, but what a change! Nothing i can say that has not already been said it seems. This is a fantastic amp, with power to waste. The loudest i have had it is 130/255 and i have to be out of the room (with the Dali's btw). The control this thing displays over the drivers is amazing. The staging, pinpoint accuracy. Depth etc etc...for its price it is an overachiever. After three months on a production waiting list i am really keen to hear the VAF's next week.
The one issue i am having is noise. I run a Bada LB-5500 conditioner. I get noticeable noise at volumes greater than 30. Once music is playing it is not an issue, but no static/noise is better than any. Any ideas would be welcome?
Just found this thread on the EX-M1 and wanted to share my setup. It previously consisted of a quad 405 copy using an Onkyo TX-NR809 as a pre-amp. Speakers were Dali Concept 10 towers(91db) . I purchased some replacement BIC speakers late last year RTR-EV15 (95db), as i felt the Dali's were under-powered with the Quad copy. Fast forward to March 2019, i now have an EX-M1 that has replaced the Quad. A Denafrips R2R Ares DAC which replaced a SMSL sanskrit proB and UPOCC Copper Litz XLRs joining the two. The Onkyo is on movie duty only now. I have gone back to the Dali speakers too as this amp has the power to feed 4 10" drivers, and spades in reserve. Speaker cable are Van Damme Blue Series studio grade. Awaiting the final replacement to the system...one of three last sets made, VAF Research DC-X63 towers which should arrive some time next week.
Review of the Kinki...as i purchased the amp and dac together the comparison to my previous gear is probably unfair, but what a change! Nothing i can say that has not already been said it seems. This is a fantastic amp, with power to waste. The loudest i have had it is 130/255 and i have to be out of the room (with the Dali's btw). The control this thing displays over the drivers is amazing. The staging, pinpoint accuracy. Depth etc etc...for its price it is an overachiever. After three months on a production waiting list i am really keen to hear the VAF's next week.
The one issue i am having is noise. I run a Bada LB-5500 conditioner. I get noticeable noise at volumes greater than 30. Once music is playing it is not an issue, but no static/noise is better than any. Any ideas would be welcome?