2. cables
  3. 148604-110055

I'm having a really hard time with: "Power cable reduced my soundstage"...

My good friend that is in the business and very very knowledgeable calmed that a well made 10ga power cable reduced his soundstage... I'm not saying it will or won't but why would it? I would like to know the science behind this. I did research on here but not satisfied. I had a pair of Logans and they were wonderful and I used stock power cables and the stage was crazy... I have been making cables for years ( musician ) and know the value on quality... what is the magic?
128x128captbeaver
mzkmxcv
777 posts
 
Soundstage is the off-axis of the speaker, it can’t be changed. Now, channel separation, phase mismatch, frequency response linearity do play roles, but a different power cable is incapable of effecting this.
geoffkait's avatar
geoffkait
23,365 posts
 
Of course vibration is a big issue, too, and it can be rather difficult to separate the two in terms of cause and effect.
michaelgreenaudio's avatar
michaelgreenaudio
1,019 posts
 

This is another thread that makes me ask "do you guys even use power cables"?

Why come up to a topic if your own experience is that limited? Power cables are not that tough to figure out yet all kinds of speculations, assumptions and techno-verbiage comes out on these types of threads. Why dumb a thread down guys? When you do that readers just go elsewhere to get real answers.

This is partly why HEA is crashing and burning so rapidly.

Michael Green

geoffkait's avatar
geoffkait
23,365 posts
 
HEA crashing and burning? Is it a victim of climate change?

”Makes me ask do you guys even use power cables”

Now that you ask, no I don’t use power cables. I’m not a fan of the noise and distortion they bring to the table. I like Signal, not Noise or Distortion. 
tom8999
153 posts
 
To Eric squires - thanks for the link to the article on power conditioners and their benefit for a Stereo System. I just had to send my Krell S550i in for repair - the main processor on the main board burned out. I use a Furman Elite to protect my Stereo from voltage surges/ noise etc. we had a power surge due to lighting. The system kept playing fine - but my digital display ‘went blank’. Other than this all the electronic equipment plugged into the Furman was fine. I pulled the Krell to send it back for repair - upon removing the power cord (an ANTICABLES power cord ) a hunk of the insulator was fractured and fell off. I should have both the Integrated Amp and power cord back this week both repaired and ready to go.

The Furman saved my butt. I will be adding another Furman to my ‘second stereo system this month.
More to discover