fsonicsmith:
Hi, all that noromance has stated is true. Having said (written:) that, I’m at a loss for why your platter is immediately coming to a stop. The break will slow it down but even with the stock platter which weighs what, say 5-6 lbs if memory serves, it still takes a few seconds to come to a complete stop. BTW, I’m not referring to the eddie brake here, I’m referring to the platter brake which engages when the turntables on-off switch is placed in the off position. A little brake pad (felt pad on a lever) comes up and meets the inside of the rim and slows it via drag.
The idler should disengage when the 301 or 401 is off (using the mechanical switch). If you are using your PSU as the sole control system, i.e. leaving the physical switch on the 301 chassis on and turning it on off using the PSU, that would most likely explain your resulting platter action. If that is the case I might suggest this is bad for your idler wheel and may, if it hasn’t already done so, result in a flat spot on your idler wheel.