2. home-theater
  3. 1276479130

Cost effective way to absorb sound in a wall unit?

I have an in wall entertainment center unit and I need to kill (totally absorb) the sound bouncing around inside part of this cabinet. I know it is not "allowed", but, I have two speakers inside this in-wall unit. Yikes! I know I'm going to get it from you guys. Anyway, I have no other place to put the speakers. The dimensions that I need to deaden are 81 inches wide by 40 inches tall. Side walls are 40 inches tall by 13 inches deep. Roof and floor is 13 inches deep by 81 inches wide I was thinking about some kind of polurethane foam to glue on the walls. Foam under the speakers and to the side of speakers where they just barely touch the side walls. The area will be hidden by overlay fabric so I don't can what the sound abodrber will look like. Their is a big TV in the middle of all this. Referrals to specific places and products would be appreciated. Some say wedge foam is better than pyramid foam. Please help
goldenears7
jdub39
495 posts
 
ATS acoustic pannels check them out you won't believe the prices and they do custom sizes.
buconero117
2,311 posts
 
Best to just change the speakers to a horn type, e. g. get the sound out of the cabinet by using a directional type speaker. With compression drivers there will be nothing in the cabinet. Add an external sub to pick up the bottom.
goldenears7 OP
14 posts
 
does directional mean same as not rear ported? Please give a few examples of the type of speakers you recommend. The Klipsch I own are forward firing with no rear port (just front firing passive radiator)
docrobbi
37 posts
 
Auralex has plenty of products that will absorb sound and can be applied with glue. I did something similar to you and used foam panels that I got from parts express (not too expensive). It would probably be beneficial to keep the sub out of the cabinet.
More to discover