I’m a big fan of tiny little bowl acoustic resonators as opposed to big ugly Tube Traps or mattress size panels. They’re much easier to set up, too. As it turns out corners aren’t even the right place for Tube Traps half the time.
Acoustic treatment
I want to build my own bass traps and was wondering if there are any other alternatives to fiberglass and rokwool. Foam is not a consideration as I don't believe it has the necessary qualities for absorption. I have heard of cotton batting, does anyone have experience with this material. The idea of fiberglass makes me itch just thinking about it, but I'm resigned to using it or rokwool if that's all I have. Please make suggestions and let me know your experiences.
Thanks
Mike
Thanks
Mike
- ...
- 96 posts total
+1 millercarbon Bass tube traps, imho, are big, expensive, ugly as sin and are completely unnecessary if you invest in this instead: https://www.theabsolutesound.com/articles/audiokinesis-swarm-subwoofer-system/ This distributed bass array system will provide sota bass response in any room and seamlessly integrate with any pair of main speakers. It'll also look a helluva better in your room than bass traps. I've been using this with large Magnepan panels for the last 4 yrs and can verify the review is very accurate. Tim |
Helmholtz resonators’ effective frequency is a function of volume of the bottle, the diameter of the nozzle and the length of the nozzle so even a Coke bottle can be converted into a tube trap. It’s not rocket science! 🚀 The problem arises at shows where many Coke bottles and beer bottles litter the room randomly, creating acoustic chaos. |
It is easy to Dampen frequencies 250 Hz and up. Doing so creatively can make a big improvement in imaging. Unfortunately as you go further down especially as the wavelengths get longer than 100 Hz it becomes progressively harder. I have played with tube traps in two installations with severe comb filtering and irregardless of anything I did with the traps could not get the variation below 10 db. This is walking around using a volume meter and tone generator. In both instances I told the customer that he needed a new room. Back then we did not have room control. Using a good room followed by careful positioning of the speakers and the listening position and damping primary reflections with the goal of improving imaging is the best way to deal with the problem of bass in an enclosed room. Some speakers and sub woofers are significantly easier in this regard. I have never seen tube traps work and my own opinion from my admittedly limited experience is that they are a waste of money. |
- 96 posts total