Who uses power conditioning?

David - if you don’t already have the Active Ground Block and if funds are limited, go for the AGB and HD grounding cables first and if possible treat the Galileo HD grounding cable. You can always upgrade to the SRX . Because the SRX really needs the AGB to show its best, in my opinion.

@whostolethebatmobile  I have the AGB SE and 4 HD grounding cables, one for the PowerCell. You are the second SR expert that is advising to use the paste. It is on the list. I already have the FoQ. : )

Fantastic David. When treating the HD cables, start with both termination pins of the grounding cable, and the copper strip of the AGB. Brush the paste on the fo.Q, a light but full coating. Then wrap the grounding cable terminations tightly with the tape. If you like the improvement, keep going and wrap the whole grounding cable. It just gets better the more you wrap. 

Thank you very much!

Experimenting further, I moved the Blue Circle Thingee from the Cullen Cable power box (a square strip) directly to an unused outlet which is situated about 8' from the one that my integrated and SACD player occupy, but shares the same line. 

That made an even bigger difference, cutting down the 12' total length (outlet to Cullen Cable box and the Thingee with a 6' PC) in half. It appears that the closer the Thingee is to the source, the better the filtering and conditioning. 

It's almost as big a step in improvement as first inserting it the older way.

All the best,
Nonoise