Thumbs up for ultrasonic record cleaning

Yes, my Elma is a dual frequency device, but I rarely use 37 KHz. 45C is warm, all right - but I find that, with my machine and its temperature sensor, nothing goes wrong until 52C. The test mentioned above, finished at considerably more than that. Hence the warp.

So i have had my electronic Record cleaner since August 2018, i have to say its amazing and competatively priced.

With a collection of over 5000 LPs,EPS,45s this has been a god send they clean up like new depending on the usage of the vinyl obviously

anyone who is looking to purchase one from the lovely gentleman i bought it from can knock one up for you.

For enquires please quote "SUPERSONIC1" to the following email address Cbaker@sky.com the is based in the UK

Hope that helps Happy cleaning

It's been a while...I've had my US machine off-line for a few months. I got it back on-line and running an adjusted solution. Since I'm committed to steaming first, I thought I'd reduce the Versa Clean. I'm currently using just 1 oz Versa Clean and 1/2 oz photo-flo in my 10 liter tank. 

This new solution is the first time I've heard it with my new SoundSmith Sussurro Mkll. What a big difference I'm hearing with the new cart. Notes a even fuller, dynamic expression is greater, vinyl is quieter. Loving it!

I’m happy with my newest cleaning solution. The stickiness on the rubber O-rings (Vinyl Stack), I reported a while back, was due to too much cleaning solution.

After the US cleaner has rested for 5 days, upon restart I notice what looks like short fine black hair. Not a lot. I assume this is vinyl "shavings".
I finally ordered my .5 micron filter to supplement my 1 micron filter. Should arrive today. I think I’ll install it after the 1 micron filter based solely on the higher cost of the .5 filter.

Really the visual "shavings" should be taken care of by the 1 micron filter. I think the real issue is either/or a lack of proper suction or not enough volume ability to be sucked out of the tank. Maybe a larger outlet of more strategically placed outlets?

For those of you with an Elma or similar unit, how is the design in this area. Maybe, like a household sink, the water outlet should be in the center of the tank?

Then again, maybe a 5 micron filter as the first filtering stage?