As a person who really doesnt like horns but has heard many, please put Klispch on the bottom of your list. The Klipsch just arent worthy of mention in the company of many of the other suggestions given. At least not without major mods. I havent heard the newer JBLs, but based on their past sound I would avoid them with equal enthusiasm.
- ...
- 212 posts total
They may not catch the eye but we listen to a pair of Audiokinesis Dream Makers in beautiful light birch so my wife forgives their big size. In a rather big room much like yours. No sub needed. Atma-sphere Ma-1 amps. Very good match. Speakers were designed with the Soundlabs in mind. I have no affiliation with them - but maybe you could contact Audiokinesis and find a good solution for your room, system and tastes. |
I heard Pure Audio Project in Montreal Show 2017: https://youtu.be/UZLmNJe_w3M https://youtu.be/MYxrfcMs4qo I think it was the best room in the show that year! |
2 more things...the PureAudioProject requires about 5 hours of assembly (super easy!!!), they will totally FILL your 20x 30 foot room, they are 96 dB efficient, and you can drive them with as little as a 3 -8 watt tube amp... which is what they were demonstrated with at the recent Munich Audio Show. Was that more than 2 more things?This is a very nice speaker (I've heard it- very tube friendly), but an amp of that power will not be able to work with a room that large with that speaker- you'll run it out of gas. You'll need about 100 watts or so to really do that right. I heard it with a very nice 2A3-based SET, which was obviously running out of power when playing Porcupine Tree in a room only about 15 feet deep. Duke's speakers (Audiokinesis) have similar efficiency (96dB) and are often higher impedance (8 or 16 ohms) and are excellent. Duke seems to also have them very fairly priced! A word about impedance- if high end best quality sound is your goal, your amplifier investment dollar will be best served by a speaker of 16 ohms rather than 8 or 4. All tube amps will have wider bandwidth, lower distortion and and greater power driving 16 ohms (most solid state amps have lower distortion into 16 ohms as well). The distortion issue is important since the increased distortion that results into lower impedances contains higher ordered harmonics which are used by the ear to sense sound pressure- IOW the ear is keenly sensitive to these harmonics- we describe them as brightness and harshness. |
- 212 posts total