High Fidelity Cables MC-0.5 Effect

@keithtexas 
 There is a breakin period of up to 400 hours according to manufacturer, although I'd say it's about 200 hours. There should be a noticeable effect immediately and over time highs should become smoother and soundstage will open up in all directions.

According to Rick, if using one module in your system, it should be placed on the line feeding the sources. 

@nonoise and @lowrider57  - Thanks guys. A little afternoon listening today and I would say:
1. Initial upper midrange prominence (more thrust forward than overdone) has retreated back to similar/proper stage with the other frequencies - although the snap of a snare drum several feet forward was pretty cool
2. The bass that was a little boomy has now firmed up some, and I think I'm getting another few cycles than without the MC
3. The upper treble is still nicely detailed, but is missing that absolute last bit of extension on cymbals and triangles. (May be hot afternoon power flow to my house vs. late[r] night)
One thing I think that may be effecting my overall sound as well - the unit is on the same outlet as my amp and I have a subwoofer powercord on the splitter with the MC-.5.  Maybe that's contributing to the sense of extra bass from the sub; I many ultimately need to dial the sub gain back a few ticks.  

@keithtexas
How are your sources being powered? As stated, sources are the primary position for the MC.

I’ve found the top-end and mids will change many times during breakin. Each new module added to my system sounded overly detailed and I could hear changes for the better while listening.
And you should get some 3D imaging at some point.

@lowrider57 Power to sources are unfiltered, direct from the wall. I do use DIY powercords using cryo’ed Acrolink 7N 4030II cables and Oyaide P-004 terminations for both transport and dac.  MIT interconnects and speaker cables.

@keithtexas
I really believe the 0.5 will have more impact on the source receptacle. Use an adapter if you don’t have room, that’s what I’m doing.
https://www.amazon.com/dp/B07H47R36P/ref=cm_sw_r_cp_apa_i_8z3sDbHQTM3SS

I have one on amp side, 2 on source.