Equipment Rack Between Speakers...Good or Bad


This question came up in another current thread and I thought it would be more appropriate to start a new thread to address it. My rack is between my speakers. In the past I have tried it off to the side and didn't notice any sonic advantage. I have seen in in the past that there are some strong feelings on this subject, and I am interested in hearing what everyone has to say.
128x128roxy54
Hi Roxy, I would recommend seismically isolating both your speakers and each individual piece of equipment and rack. There are a wide range of isolators on the market that definitely do NOT work. I would suggest one of the following:

Ingress Engineering cup and rollers directly under your equipment, supported by a thick slate platform supported by either Machina Dynamica springs, Townshend Pods or a 12 inch dia. inner tube at very low pressures.

For speakers the easiest solution is Townshend Podiums but you could also use MD springs and/or Ingress speaker footers.

For rack isolation you can use either Townshend Bars or Pods, alternatives would be MB springs and/or Ingress footers.

For more detailed advice you are welcome to PM me.
For anyone considering Machina Dynamica Springs for speakers and subwoofers I recommend using two 2x4s two to three feet long depending on size of speaker under each speaker with a Super Stiff Spring located at each end of the 2x4s. That allows a wide arrangement for the springs, necessary for stability with heavy high centervof gravity objects. For lightweight speakers use Baby Promethean Springs and two 2x4s.
So, if you have a TV mounted on an audio rack positioned between and a couple of feet behind the speakers, would you cover the TV with absorbing or diffusing material when listening to audio system? I’m currently using a sound absorbing panel in front of the TV screen.
I got a pair of GIK Freestand panels (gobos). Experimenting with positioning was interesting.  Least effective was the pair of them standing directly in front of the screen and blocking it.  Much better was having them right beside the screen, each side, touching and perpendicular to the wall behind (the front wall).  Evidently, if your screen isn't wall-mounted, reflections can get behind it too as well as bouncing off the front of it.  Best was them sitting half way between the back inner corner of the speakers and the front corners of the stand, at about 45 degrees to everything else.