Why HiFi manufacturers don't make active crossovers anymore?


Hello to all,

On the recent days, I noticed that a lot of manufacturers of Hifi 2 channel systems, had plenty of options in a not so long past, of active crossovers, like Luxman, Accuphase, higher end Sony stuff, and many more, why do you think HiFi manufacturers abandoned the inclusion of active cross overs, channel dividers, in their lineup?

Accuphase still makes a digital one.

Appears that this devices are only still relevant in the Pro Audio world, why Home HifI abandoned the active cross over route? It's correct to assume that?

I think that can be very interesting tri-amp a three way loudspeakers with active cross overs, would like to know more about it too...

Share your thoughts about the subject, experiences in bi-amp and tri-amp with active crossovers and etc....

Thanks!
128x128cosmicjazz
Thinking about that can be interest we make a list about HiFi manufacturers that offered active crossovers aka channel dividers (as is described by some HiFi manufacturers from Japan), it can be current models or vintage.

Let’s stay with HiFi manufacturers only, no Pro Audio.

I will start with:

Accuphase
Sony
Pioneer
Luxman
Threshold
Mark Levinson
Cello
Technics? produced any in the past? can’t find..


You can add the Beveridge RM-3 to the list. Designed by Roger Modjeski of Music Reference when he worked at Beveridge Audio. The active crossover was part of the RM-1, RM2, RM-3 system that linked with the built in OTL amps of the Beveridge 2SW speaker system. I have been using the RM-3 in my system for a few years now. Two way with input cards for high and low pass, bass, and treble controls.
I could comfortably say that the Nelson Pass analog crossovers are one of the top most crossovers that are available. Super flexibility and transparency. And most of all you keep the full chain analog if you are using a TT or any other analog source. 
Of course if you are a streaming/digital only source, then one would consider the other digital crossover options as they are more cost effective. 
@mahlman --

That 3060 is what I run too. What do you have for a system? You are right about DIY and pro usage.

Just looked over your setup via your profile - great to see you using all-horns as well. Do you use both systems depicted? 

You can view my system via my profile, only change being that the Crown Macro-Tech 1200 sub amp will be replaced by a Crown K2 in the near future. 
" Just looked over your setup via your profile - great to see you using all-horns as well. Do you use both systems depicted? "
 The set of La Scalas is not my main listener and has been sold. The big set however is and it is my daily listener. The twp piece La Scala is an industrial LS rebuilt to be two piece with 25mm Baltic Birch sides, rebuilt crossover, stock K-55V on the mid horn and a set of MAHL large tweeters with B&C DE10 drivers. It was an experiment that turned out really well and was built for a customer so they sadly are not active crossover people, YET! They drool over the big horns every time they are here and they are doomed because they have actually heard great horns properly set up.