What Class D amps will drive a 2 ohm load

Theta Digital Prometheus -

8 ohm - 250 W
4 ohm - 500 W
2 ohm - 850 W

Yes another one beside the Spectron (which is yet to be independently tested) that "can" get the watts up into 2ohms, but this is at a cost.

JA’s Note: " However, the distortion rises considerably into 2 ohms"

BTW: Note! Both use Linear power supplies that’s why they’re big/heavy for a Class-D >20kg. No smp power supplies here, that’s a good thing.

Cheers George

A Carver Signature Sunfire 600 should do the trick.  That amp is so powerful it’ll get good sound from a cinder block.

If you get one Bill Flannery has up-kept there will be no heterodyning. 

maplegrovemusic1,030 posts09-01-2019 9:05amhttps://www.crutchfield.com/p_859XLS2502/Crown-XLS-2502.html?awcr=77584293537695&awdv=c&awkw...

Amazing for $599.00!!!
"says" again not by an independent tester.

• 440 watts x 2 at 8 ohms
• 775 watts x 2 at 4 ohms
• 1200 watts x 2 at 2 ohms

Why get any of the others?? When you have this for $599

Cheers George

It's been reported that Jim Thiel ended up using Krell 600 Watt'ers.

The impedance of the CS5 at 20Hz is 2 ohms and not .5 ohms as stated. At 10Hz it is approximately .6 ohms.