Ohm Walsh Micro Talls: who's actually heard 'em?

While the wife and kiddo were out on Saturday, I indulged in some high-SPL listening of Graceland and other albums on vinyl.  My normal listening level is around 7-9 o'clock position on my Pioneer VSX-D1S (http://www.hifi-classic.net/review/pioneer-vsx-d1s-435.html
On Saturday I took it up to 12.  I  didn't notice the loudness at all until there was a squawking saxophone that  set me off, and I had to dial it back to 11 temporarily.  I  get emotional when I  listen now, so I sat in my listening chair with tears in my eyes for several hours.

Yes, my 4XO's like power.

Those original Walsh 2s from the 80s are a lot of speaker for the $ these days assuming the drivers are in good shape  (possible) but are not nearly as refined sounding top to bottom as the newer models. 

Also note that older ohm speakers can be traded in for discounts on new ones assuming the cabs can be refurbished (most can). They can also be upgraded so any old Ohms can have significant value still that way.

I took a 2 apart , thin plain paper drivers etc . Entire guts could not have cost5 bucks  !

First let me say that all I care about  is the sound, not the parts used to create it, and perhaps WAF to some extent.    

Yes its notoriously pretty ugly inside an original Walsh 2. Good thing its all out of sight. I doubt the newer ones are much prettier inside the cans but the sound is competitive now with other modern speakers whereas original Walsh 2s are not.

I know because I a/b compared my original Walsh 2s against my ohm 100s in original Walsh 2 cabs when I acquired those before trading in my 2s for newer bigger 5 series 3, that I still use in my main system. The 100s are in my second family room system.

I also run small Kef ls50s and just recently now Vanatoo Transparent One encore monitors in other smaller rooms off the same system as the Ohms. Just prior recently, I ran Dynaudio and Triangle speakers in those rooms. Triangle still uses paper drivers I’m pretty sure because those still offer unique advantages these days in terms of speed and transparency. Those were not characteristics of original Walsh 2s, though definitely more so with the newer models.

Its the cabinets that have trade-in value. So I believe you can still pick up an old pair cheap and get up to 40% off new models just by trading in.

I did that when buying my Ohm 5 series 3 speakers back in 2008. Traded in my old Walsh 2s and picked up a pair of old C2s on ebay for not much and had them shipped straight to Ohm for 40% off trade in. The final cost of the Walsh F5 series three speakers to me in 2008 was ~$2400. These are the 12" drivers of the time with 4 built in 3-way level adjustments in refurbed OHm F cabinets. They listed for ~ $5500 at the time whereas same driver in new cabs were $6000 at the time.

Building speakers for a living in NYC these days can’t be cheap. I know John Strohbeen strives to offer the best sound possible per $$$ and has been in business now for over 40 years so he must be doing something right.