2. analog
  3. 150940-129624

Nasty Static on Vinyl

Help, Help
I am getting static like crazy even when my amp is muted. Trying to problem solve this and could use anyone’s help.
I have been resurrecting my record collection and adding new records. Replacing all the inner sleeves with MoFi sleeves and outer sleeves as well to protect the covers. It’s very strangle that some of my records have crazy amounts of pops and clicks which is definitely static. So much so that the static comes through even when the amp is muted. Some play fine. Purchased Dire Straits Brothers in Arms MoFi and Wes Montgomery at the Blue Note, totally unplayable!
Ive tried bathing them in distilled water, cleaning them, nothing. Gonna buy a zerostat and I hope that helps. Driving me crazy that I can’t listen to my collection. Any help would be much appreciated.
128x128audiosaurusrex
mijostyn's avatar
mijostyn
8,570 posts
 
Lewm, it sounded to me like he pulled one of the clips off and was trying to make the connection with a bare wire. In which case all four wires should be trimmed and new ones installed. Of course new clips will not do anything for a static problem but a loose connection can sound an awful lot like static. Like you I am a bit confused because the way the problem is being described it does not quite make sense. 
audiosaurusrex's avatar
audiosaurusrex OP
320 posts
 
Sorry for my confusing comments. I think there were a few things going on here. My fumble fingers did pull off the blue cart connector after I installed the Hana so I thought I screwed up the grounding blue being the left ground. Did not adjust the gain on the phonostage and when the music peaked on the vinyl that what was coming thru. Sounded like static to me with or without the amp muted. When I lowered the gain to -10db the problem was solved.  I was able to reseat the connector but I'm gonna replace all of them. I will try different settings on the impedance dial with 100, 220, 470, 2k2, 4k7 and 10k being the presets. Novice to this stuff but I'm certainly very thankful to have you all of you to help.
lewm
13,167 posts
 
I missed the bit about the blue lead connector, which is why I was puzzled by the recommendation to change the cartridge clips. Mea culpa.

The platter usually does not discharge the LP. According to Shure, the charge simply re-distributes itself on the underside of the LP. When you then remove the LP from the platter, the charge reappears uniformly on both sides. That’s the crackling sound you sometimes hear when flipping or removing the LP.
More to discover