2. speakers
  3. 1286063535

Focal Utopia monitors: Diablo vs. Micro Be

I have a pair of Micro Utopia Be speakers (complemented with a REL Stentor 3 subwoofer) which I drive with an Accuphase combo, i.e. the E-550 amp together with the DP-500 cd player. I like the speakers very much and I was not really thinking of getting rid of them, nor am I feeling the need for a change/upgrade. However, an audiophile friend of mine informed me today than one of his friends is selling a pair of Focal Diablo Utopia 3 speakers for about half the retail price. Since the speakers are less than a year old this seems to be a good bargain.

I am interested to here opinions from anybody who has compare these two speakers. Are the differences so significant to justify a 5K (euros) investment?

Thanks!
nvp
nvp OP
317 posts
 

Elviukai, according to the Focal documentation the nominal impedance of both Diablo and Micro Be speakers is 8 ohms. As I have mentioned twice in my post my Accuphase outputs 30 watts into 8 ohms loads. The E-550 amp will output 60 watts into 4 ohms loads, however, according to the Focal documentation the lowest impedance of Micro Be is 5 ohms. Thus, unless the information on the Focal manual and site is wrong my amp will not output 60 watts when driving the Micro Be speakers. Into 5 ohms loads the Accuphase E-550 amp will output 48 watts.

Paul
elviukai's avatar
elviukai
135 posts
 
Hmm.. my expierence says that specifications on websites is for.. comaparision with other manufacturers, nothing more. and its fine for that purpose (assuming all says the same "true")

OK I checked, the lowest Micro impedanse is 4.2ohms , while rdc is 3.7ohms its definately 4 ohm speaker and your accuphase will deliver more current. Diablo have very similar results, thought its electrical pahse shift and impedance changes is much smoother than Micro. both speakers are easy to drive (this is not Maestro with 3 drivers overlaping with total 1.6ohms!) but theese impedance changes and ~1db more eficienty on Diablo may be considered as better for amp.
phaelon
1,052 posts
 
Elviukai, will you tell me where you found the Diablo's phase shift and impedance curve. I've been looking without success.
elviukai's avatar
elviukai
135 posts
 
I measured it by myself. I didn't noticed electrical phase measurements but I have a frequency and impedanse measuremets in audiomagazines as well.
phaelon
1,052 posts
 
Thanks Elviukai, I'm using a robust 25W/Ch. tube integrated with the first generation Mini Utopias. I'm generally happy with the combo but the Mini's have some severe spikes below 100 Hertz. Based on your measurements, do you have an opinion on a change to the Diablos.
More to discover